CANARMNA CL-19 LED Flush Mount Installation Guide

: May 15, 2024
: CANARMNA

Table of Contents

CANARMNA CL-19 LED Flush Mount
Product Usage Instructions
INSTALLATION
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CANARMNA CL-19 LED Flush Mount

CANARMNA-CL-19-LED-Flush-Mount-product

Specifications:

Model: CL-19
Type: LED Flush Mount
Color Temperature Options: 3000K/4000K/5000K
Max Lamps per 150W Dimmer:
- CL-19-13: 6 pcs
- CL-19-20: 3 pcs

Product Usage Instructions

Tools and Materials Required:

Phillips Screwdriver
Wire Cutters
Pliers
Wrench
Wiring supplies as required by local electrical code

Important Safety Instructions:

Read all instructions before installation.
The system is intended for installation by a qualified electrician in accordance with the National Electrical Code and local regulations.
Prior to installation, turn off the main power switch in the main fuse box or circuit breaker.

Installation Steps:

Hold the supply wires and separate the fixture and lens.
Secure the mounting screws to the electrical box, screwing halfway.
Connect supply wires to fixture wires using proper size wire nuts. Match ground, common, and hot wires accordingly.
Push back all wire nuts into the junction box once connected.
Attach the fixture to the mounting screws, twist, and tighten. Secure with wood screws and plastic anchors.
Place the red arrow label beside the hole on the ceiling, ensuring alignment with the arrow on the fixture.
Select the desired color temperature (CCT) from the options provided.
Twist and secure the lens in place.

Compatible Wall Dimmers:

Leviton: #742-66EV-P0W, 742-6672-HLW, 722-6674-PDW
Lutron: #SCL-153PH-WH

FAQ:

Question: What should I do if the light fixture is flickering?
Answer: Flickering may indicate loose wiring connections. Ensure all connections are secure and properly insulated with wire nuts.
Question: Can I install this fixture without a qualified electrician?
Answer: It is recommended to have a qualified electrician install to ensure safety and compliance with electrical codes.

NEED HELP?
Call or Email us first

Our service team is ready to answer your questions…
1-800-265-1833 (English) / 1-800-567-2513 (French)
Monday – Friday
8 AM – 5 PM E.S.T.
IN CANADA – ressalescanada@canarmna.ca
IN USA – ressalesusa@canarmna.ca

INSTRUCTIONS ABOUT RISK OF FIRE OR INJURY TO PERSONS
READ ALL INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS

TOOLS AND MATERIALS REQUIRED $CANARMNA-CL-19-LED-Flush-Mount-fig- $1$$

Wiring supplies as required by local electrical code

WARNING:

READ ALL INSTRUCTION BEFORE INSTALLATION.
SYSTEM IS INTENDED FOR INSTALLATION BY A QUALIFIED ELECTRICIAN BY THE NATIONAL ELECTRICAL CODE AND LOCAL REGULATIONS.
GO TO THE MAIN FUSE BOX, OR CIRCUIT BREAKER. PLACE THE MAIN POWER SWITCH IN THE “OFF” POSITION AND UNSCREW THE FUSE(S) OR SWITCH ”OFF” THE CIRCUIT BREAKER SWITCH(ES) THAT CONTROL THE POWER TO THE FIXTURE OR ROOM THAT YOU ARE WORKING ON.
PLACE THE WALL SWITCH IN THE “OFF” POSITION.
SUPPLY CONDUCTORS (POWER WIRES) CONNECTING THE FIXTURE MUST BE RATED MINIMUM 90°C. IF UNCERTAIN, CONSULT AN ELECTRICIAN.

CAUTIONS：

1. THESE LUMINAIRES (FIXTURES) ARE DESIGNED TO MEET THE LATEST NEC REQUIREMENTS AND ARE LISTED IN FULL COMPLIANCE WITH ETL LIST.
2. BEFORE ATTEMPTING INSTALLATION, CHECK YOUR LOCAL ELECTRICAL CODE, AS IT SETS THE WIRING STANDARDS FOR YOUR LOCALITY

INSTALLATION

$CANARMNA-CL-19-LED-Flush-Mount-fig- $2$$

Hold the supply wires and seperate the fixture and lens.
Secure the mounting screws (only screwing on halfway) to the electrical box.
Connect supply wires to fixture wires and insulate with proper-size wire nuts. Connect incoming ground wire (green or bare) to fxture ground wire (green or bare). Connect incoming common (white) wire to fixture white wire.
Connect incoming hot (typically black) wire to fixture black wire.
Once the wires are connected, ensure to push back all the wire nuts into the junction box.
Attach the fixture to the mounting screws, twist the fixture and tighten the screws. Secure the three wood screws with plastic anchors.
Put the label with a red arrow beside the hole of the fixture on the ceiling. (Be sure the red arrow on the fixture and the arrow on the ceiling are lined up properly.)
Select the CCT needed, 3000K/4000K/5000K for selection.
Twist and secure the lens.