CANARMNA IPL1123A03XX9 CHANDELIER Ball Ceiling Pendant Light Instruction Manual

Table of Contents

CANARMNA-IPL1123A03XX9-CHANDELIER-Ball-Ceiling-Pendant-Light-
product

Specifications:

Safety Precautions:

Turn off the electrical power before starting the installation of the light fixture.
This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
Connect the ground wires (bare copper or green) from your fixture to the ground wire (bare copper or green) or ground screw in the electrical box.
To clean the fixture, turn off the power, wait for it to cool, and wipe the fixture with a clean, soft cloth.

Installation:

Attach nipple to the mounting bracket. Adjust so it will clear hole in the back of the fixture and then lock the nipple in place with star washer and hex nut. Attach the mounting bracket to the electrical box with electrical box screws (not included).
Connect the ground wires (bare copper or green) from your fixture to the ground wire (bare copper or green) or ground screw in the electrical box. Connect the black wire from the fixture to the black wire in the electrical box and connect the white wire from the fixture to the white wire in the electrical box.
Once connections of wires are completed, carefully tuck wires and wire nuts into the electrical box making sure no bare wire (on the black and white) is visible at the wire nuts.
Secure the pan to the nipple tightening by star washer and hex nut. Screw the finial to the nipple.
Install specified bulb type and wattage (not included).
Screw the glass shade onto the fixture. Ensure the glass is securely attached to the fixture.
Screw the rod onto the glass.

Q: What tools and materials are required for installation?
- A: Phillips Screwdriver, Wire Cutters, Wiring supplies as required by local electrical code, Pliers, Wrench.
Q: How should I clean the fixture?
- A: Turn off the power, wait for it to cool, and wipe the fixture with a clean, soft cloth.

INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS READ ALL INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

Wiring supplies as required by local electrical code

TURN OFF THE ELECTRICAL POWER BEFORE STARTING THE INSTALLATION OF THE LIGHT FIXTURE.
THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
CONNECT THE GROUND WIRES (BARE COPPER OR GREEN) FROM YOUR FIXTURE TO THE GROUND WIRE (BARE COPPER OR GREEN) OR GROUND SCREW IN THE ELECTRICAL BOX.
TO CLEAN THE FIXTURE, TURN OFF THE POWER, WAIT FOR IT TO COOL, AND WIPE THE FIXTURE WITH A CLEAN, SOFT CLOTH.
NOTE: The product may not look exactly as shown in the figures.

Attach nipple to mounting bracket. Adjust so it will clear hole in back of the fixture and then lock nipple in place with star washer and hex nut. Attach the mounting bracket to electrical box with electrical box screws (not included).
Connect the ground wires (bare copper or green) from your fixture to the ground wire(bare copper or green) or ground screw in the electrical box. Connect the black wire from the fixture to the black wire in the electrical box and connect the white wire from the fixture to the white wire in the electrical box.
Once connections of wires are completed, carefully tuck wires and wire nuts into the electrical box making sure no bare wire (on the black and white) is visible at the wire nuts.
Secure the pan to the nipple tightening by star washer and hex nut. Screw the finial to the nipple. $CANARMNA-IPL1123A03XX9-CHANDELIER-Ball-Ceiling-Pendant-Light-fig $2$$
Install specified bulb type and wattage (not included).
Screw the glass shade on to the fixture. Ensure the glass is securely attached to the fixture.
Screw the rod on to the glass. $CANARMNA-IPL1123A03XX9-CHANDELIER-Ball-Ceiling-Pendant-Light-fig $3$$