Shelltec 3411147 Recycled Corrugated Panels Instructions

3411147 Recycled Corrugated
Panels Instructions

3411147 Recycled Corrugated Panels

Shelltec mounting with screw

• Standard roof slope 10° = 17.6% (minimum roof slope 7° =12.3%)

• the max. 56 cm with average snow and wind loads. Accordingly reduce in high load areas!
  -Distance 56 cm up to 90 kg/m² snow load
  -Slat spacing 46 cm up to 200 kg/m² snow load
  -Slat spacing 31 cm up to 350 kg/m² snow load

• Only a conical drill, a guide, possibly a saw, cordless screwdriver and screws with sealing caps are required use a weight-distributing gangway

• Construction against the prevailing wind direction, from the eaves to the ridge

•  To avoid corner cuts or quadruple overlaps, the panels are laid staggered. Start the first row with a whole sheet and the second with a halved sheet.

• Pre-drill panels with a twist drill, drill diameter 10 mm

• Side overlap one wave, and with low roof slopes and/or high loads 2 waves

• Longitudinal overlap of at least 15 cm, and with low roof slopes and/or high ones loads at least 20 cm

• Maximum panel overhang in the roof edge 5 cm

• Screw on every 3rd wave crest, and in the overlap and edge area on each wave!
  NOTE: The welling must not be crushed. Only screw/nail tight enough that the sealing cap fits properly.

• First screw the first and last wave top, then the intermediate fasteners.

•  approx. 13-15 Fixings/m²

•  Install moldings.

•  Manufacturer’s warranty only when using original Gutta accessories.

Object location/Roof slope

To belong

| Plastic drill HSS, stepless, 4
– 14mm,Art. No.: 3410241
---|---
Shelltec Screw
Galvanized, with  sealing ring Dimensions: 4.5×70 mmItem number: 3411147

Processing

| Saws with fine teeth hand saws or table saws. Delete all shavings.
---|---
Clean only with mild soapy water, lots of it water and a sponge.
| It has to be done sufficient ventilation on the back side according to DIN 4108 are taken care of.
---|---
Walk on alone immediately weight distributing, padded footboard

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>