CANARMNA IPL417A01 Medicine Cabinet Instruction Manual

MEDICINE CABINET

MC-3 03/22

NEED HELP?
Call or Email us first

Our service team is ready to answer your questions… Monday – Friday 8 AM – 5 PM E.S.T
1-800-265-1833 (English) / 1-800-567-2513 (French)
IN CANADA – ressalescanada@canarmna.ca – IN USA – ressalesusa@canarmna.ca

INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS READ ALL INSTRUCTIONS

IMPORTANT SAFETY
INSTRUCTIONS
SAVE THESE INSTRUCTIONS

TOOLS AND MATERIALS REQUIRED:

Phillips Screwdriver                   Wire Cutters

Spirit Level                                 Pencil

Tape Measure                             Drill

SAFETY PRECAUTIONS:

1. ENSURE THE SCREWS AND WALL PLUGS ARE SUITABLE FOR THE WALL INTENDED TO MOUNT THIS PRODUCT. CONSULT THE QUALIFIED PERSON FOR SAFETY INSTALLATION.
2. CLEAN GLASS WITH WATER ONLY.
3. FOR HOUSEHOLD USE ONLY.
4. WARNING – RISK OF TIP OVER. MAX. 12 LB LOAD.
5. USE THIS FURNISHING ONLY FOR ITS INTENDED USE AS DESCRIBED IN THESE INSTRUCTIONS. DO NOT USE ATTACHMENTS NOT RECOMMENDED BY THE MANUFACTURER.
6. FOR LOADING ALWAYS PUT HEAVIER ITEMS AT THE BOTTOM AND NOT NEAR THE TOP IN ORDER TO HELP PREVENT THE POSSIBILITY OF THE FURNISHING TIPPING OVER.
7. EACH SURFACE INTENDED TO SUPPORT A LOAD SHALL HAVE A CORRESPONDING STATEMENT IN THE USE INSTRUCTIONS SPECIFYING THE MAXIMUM INTENDED LOAD FOR THAT SURFACE IN POUNDS (KILOGRAMS).
8. REQUIRE AT LEAST 2 PERSONS TO SAFELY INSTALL THIS PRODUCT.

NOTE: Product may not look exactly as shown in figures.

INSTALLATION:

Step 1

Determine whether the cabinet door opens to the left or right.

Step 2

Measure cabinet’ s width and height as shown.
A – Width
B – Height
C – Distance of between the mounting bracket and the top of the cabinet

Step 3

Transfer cabinet’s dimensions to the wall as shown with the bottom being a minimum1’’ above tap height. (using a level as shown)

Step 4

1. Wall Plug (Not supplied)
2. Washer (Optional)
3. Wood Screw (Not supplied)
4. Mounting Bracket

Using a level, draw a line for the distance C down from the top of cabinet line. Place mounting bracket’s top edge against line and mark 3 -screw locations, drill pilot hole. (use wood screws, washer as optional and/or wall plugs as required). ENSURE THE SCREWS AND WALL PLUGS ARE SUITABLE FOR THE WALL INTENDED TO MOUNT THIS PRODUCT. CONSULT THE QUALIFIED PERSON FOR SAFETY INSTALLATION.

Step 5

1. Wall
2. Cabinet
3. Mounting Bracket

Hang the cabinet on the mounting bracket.

Step 6

1. Screw
2. Shelf Clip

Attach 2 mounting brackets to the wall by screws and/or wall plugs as required. ENSURE THE SCREWS AND WALL PLUGS ARE SUITABLE FOR THE WALL INTENDED TO MOUNT THIS PRODUCT. CONSULT THE QUALIFIED PERSON FOR SAFETY 2-3 INSTALLATION.

Step 7

1. Cap
2. Shelf Clip

Choose the position for your shelves, then insert the shelf clips into holes on the sides of the cabinet. Cover the rest of holes with the caps.

Step 8

1. Glass Shelf

Install the glass shelf to the cabinet.
a. Push a side of the glass shelf into the left or the right pins.
b. Snap the glass shelf into the oppsite side.

Step 9

1. Magnet
2. Metal coin

Be mounted on cabinet during production.

Please attach the metal coin to the magnet on the cabinet, and stick the circular double-sided tape on the metal coin, then close the cabinet door.

Open the door, the metal coin will be sticked on the cabinet door.

Tel: (613) 342-5424, Fax: (800) 263-4598

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>