CANARMNA ICH1094A05BBG40 Joelle Modern Farmhouse Linear Chandelier Instruction Manual

CANARMNA ICH1094A05BBG40 Joelle Modern Farmhouse Linear Chandelier

TOOLS AND MATERIALS REQUIRED

SAFETY PRECAUTIONS

1.  TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.
2.  THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
3.  CONNECT THE GROUND WIRES (BARE COPPER OR GREEN) FROM YOUR FIXTURE TO THE GROUND WIRE (BARE COPPER OR GREEN) OR GROUND SCREW IN THE ELECTRICAL BOX.
4.  TO CLEAN THE FIXTURE, TURN OFF THE POWER, WAIT FOR IT TO COOL, AND WIPE THE FIXTURE WITH A CLEAN, SOFT CLOTH.
   NOTE: Product may not look exactly as shown in figures.

INSTALLATION

1. Remove the thumb screws that are already on the frames. Position the frames as shown. Install the 4 connecting bars on to the frames by tightening the thumb screws.
2. Remove the locking nuts, covers, hex nuts and star washers from the fixture. Feed the wires from the fixture through the holes in the frame and position the fixture into the frame as shown.
3.  Secure the fixture to the frame using the star washers, hex nuts, covers and locking nuts.
4. Position the covers in place. Install the length of rod that is required by threading wire through the rod and screwing it to the fixture. Install swivel to the rod, ensuring that the sleeve is at the swivel.
5.  Tighten the hex nut and washer to the stem on the canopy.
6. Attach nipple to mounting bracket. Adjust so it will clear hole in back of fixture and then lock nipple in place with star washer and hex nut. Attach mounting bracket to electrical box with electrical box screws (not included).
7.  Use the suspended wire to hang the fixture as shown for wiring connection.
8. Connect the ground wires (bare copper or green) from your fixture to the ground wire (bare copper or green) or ground screw in the electrical box. Connect the black wire from the fixture to the black wire in the electrical box and connect the white wire from the fixture to the white wire in the electrical box.
9. Once connections of wires are completed, carefully tuck wires and wire nuts into the electrical box making sure no bare wire (on the black and white) is visible at the wire nuts.
10. Secure the pan to the nipple tightening by star washer and hex nut. Screw the finial to the nipple.
11. Install specified bulb type and wattage (not included).

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>