CANARMNA IPL1097A01BK Declan 1 Light Pendant Ceiling Light Instruction Manual

June 4, 2024
CANARMNA

CANARMNA IPL1097A01BK Declan 1 Light Pendant Ceiling Light

TOOLS AND MATERIALS REQUIRED

Wiring supplies as required by local electrical code.

SAFETY PRECAUTIONS

  1. TURN OFF ELECTRICAL POWER BEFORE STARTING THE INSTALLATION OF THE LIGHT FIXTURE.

  2. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE
    BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.

  3. CONNECT THE GROUND WIRES (BARE COPPER OR GREEN) FROM YOUR FIXTURE TO THE GROUND WIRE (BARE COPPER OR GREEN) OR GROUND SCREW IN THE ELECTRICAL BOX.

  4. TO CLEAN THE FIXTURE, TURN OFF THE POWER, WAIT FOR IT TO COOL, AND WIPE THE FIXTURE WITH A CLEAN, SOFT CLOTH.
    NOTE: The product may not look exactly as shown in the figures.

INSTALLATION

CANARMNA-IPL1097A01B-KDeclan-1-Light-Pendan-tCeiling-Light-
FIG-1

  1. Install the length of rod that is required by threading wire through the rod and screwing it to the fixture. Install swivel to the rod, ensuring that the sleeve is at the swivel.
  2. Loosen “B”. Adjust stud to desired length and lock in place with “B”.
  3. Mount the mounting bracket to the electrical box using electrical box screws (not included). Make sure the studs on the mounting bracket are facing out from the electrical box.
  4. Connect the ground wires (bare copper or green) from your fixture to the ground wire (bare copper or green) or ground screw in the electrical box. Connect the black wire (or wire with marking) from the fixture to the black wire in the electrical box and connect the white wire from the fixture to the white wire in the electrical box.
  5. Once connections of wires are completed, carefully tuck wires and wire nuts into the electrical box making sure no bare wire (on the black and white) is visible at the wire nuts.
  6. Position fixture over studs on mounting bracket assembly. A secure fixture in place with star washers and cap nuts.
  7. Remove spinner nut from a socket. Position the ring and glass on lamp and secure with a spinner nut.
  8. Install specified bulb type and wattage (not included).

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

CANARMNA User Manuals

Related Manuals