CANARMNA ICH2013B05BNY Easton 5 Light Brushed Nickel Candle Style Chandelier Instructions

CANARMNA ICH2013B05BNY Easton 5 Light Brushed Nickel Candle Style

Chandelier

Product Information

Chandelier

The ICH2013B05 05/22 chandelier is a decorative lighting fixture that adds elegance to any room. It comes with a swivel sleeve rod, fixture B, star washer, cap, nut, finial, shade frame, bulb spinner, and mounting bracket assembly. The product requires a   Phillips screwdriver, wire cutters, pliers, wrench, and wiring supplies as required by the local electrical code for installation.

Product Usage Instructions

Important Safety Instructions

• Read all instructions carefully before proceeding with the installation
• Turn off electrical power before starting installation of the light fixture
• This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved
• Connect the ground wires (bare copper or green) from your fixture to the ground wire (bare copper or green) or ground screw in the electrical box
• To clean the fixture, turn off the power, wait for it to cool, and wipe the fixture with a clean, soft cloth

Product Installation

1. Install the length of the rod that is required by threading the wire through the rod and screwing it to the fixture. Install a swivel to the rod, ensuring that the sleeve is at the swivel.
2. Loosen B. Adjust the stud to the desired length and lock in place with B.
3. Mount the mounting bracket to the electrical box using electrical box screws (not included). Make sure the studs on the mounting bracket are facing out from the electrical box.
4. Connect the ground wires (bare copper or green) from your fixture to the ground wire (bare copper or green) or ground screw in the electrical box. Connect the black wire (or wire with marking) from the fixture to the black wire in the electrical box and connect the white wire from the fixture to the white wire in the electrical box.
5. Once connections of wires are completed, carefully tuck wires and wire nuts into the electrical box making sure no bare wire (on the black and white) is visible at the wire nuts.
6. Position fixture over studs on mounting bracket assembly. A secure fixture in place with star washers and cap nuts.
7. Remove the spinner nut from a socket. Position the frame onto the socket and secure it with the spinner nut.
8. Install specified bulb type and wattage (not included).
9. Position the shade onto the frame and secure it with the finial.

Note: The product may not look exactly as shown in the figures. For any further assistance, please contact us at Tel: 613-342-5424 or Fax: 800-263-4598.

INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS READ ALL INSTRUCTIONS

TOOLS AND MATERIALS REQUIRED

Wiring supplies as required by local electrical code.

SAFETY PRECAUTIONS

1. TURN OFF THE ELECTRICAL POWER BEFORE STARTING THE INSTALLATION OF THE LIGHT FIXTURE.
2. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
3. CONNECT THE GROUND WIRES (BARE COPPER OR GREEN) FROM YOUR FIXTURE TO THE GROUND WIRE (BARE COPPER OR GREEN) OR GROUND SCREW IN THE ELECTRICAL BOX.
4. TO CLEAN THE FIXTURE, TURN OFF THE POWER, WAIT FOR IT TO COOL, AND WIPE THE FIXTURE WITH A CLEAN, SOFT CLOTH.

NOTE: The product may not look exactly as shown in the figures.

INSTALLATION

1. Install the length of the rod that is required by threading the wire through the rod and screwing it to the fixture. Install the swivel to the rod, ensuring that the sleeve is at the swive.
2. Loosen “B”. Adjust the stud to desired length and lock in place with “B”.
3. Mount the mounting bracket to the electrical box using electrical box screws (not included). Make sure the studs on the mounting bracket are facing out from the electrical box.
4. Connect the ground wires (bare copper or green) from your fixture to the ground wire (bare copper or green) or ground screw in the electrical box. Connect the black wire (or wire with marking) from the fixture to the black wire in the electrical box and connect the white wire from the fixture to the white wire in the electrical box.
5. Once connections of wires are completed, carefully tuck wires and wire nuts into the electrical box making sure no bare wire (on the black and white) is visible at the wire nuts.
6. Position fixture over studs on mounting bracket assembly. A secure fixture in place with star washers and cap nuts.
7. Remove the spinner nut from a socket. Position the frame onto the socket and secure it with the spinner nut.
8. Install specified bulb type and wattage (not included)
9. Position the shade onto the frame and secure it with the finial.

Tel: 613-342-5424, Fax: 800-263-4598. Our service team is ready to answer your questions… 1-800-265-1833 (English) / 1-800-567-2513 (French) Monday – Friday 8 AM – 5 PM E.S.T. IN CANADA – ressalescanada@canarmna.ca. – IN USA – ressalesusa@canarmna.ca 

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>