CANARMNA IOL598 Wall Sconces Installation Guide

: May 15, 2024
: CANARMNA

Table of Contents

CANARMNA IOL598 Wall Sconces
Product Information
Product Usage Instructions
SAFETY PRECAUTIONS
INSTALLATION
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CANARMNA IOL598 Wall Sconces

Product Information

Specifications:

Model: IOL598
Date: 10/22

Product Usage Instructions

Installation Instructions:

Installation Steps:

Attach Easy ConnectTM mounting bracket to electrical box with electrical box screws (not included).
Connect electrical wires from electric box (house wiring) into correct inserts.
Connect electrical wires from fixture into correct inserts.
Tuck electrical wires into electrical box and position fixture over studs on mounting bracket assembly. Secure fixture in place with star washers and cap nuts.
Install specified bulb type and wattage (not included).
Screw the glass shade onto the fixture ensuring it is securely attached.
Seal around the fixture with weather-resistant caulk after installation.

Contact Information:

Tel: 613-342-5424, Fax: 800-263-4598

FAQ:

Q: Can I use this product outdoors?
A: Yes, this product is weather-resistant and suitable for outdoor use.

Q: What type of bulbs should I use with this fixture?
A: You can use specified bulb types and wattages suitable for the fixture. Bulbs are not included with the product.

INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS
READ ALL INSTRUCTIONS
IMPORTANT SAFETY
INSTRUCTIONS
SAVE THESE INSTRUCTIONS

TOOLS AND MATERIALS REQUIRED

SAFETY PRECAUTIONS

TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.
WIRING SUPPLIES AS REQUIRED BY LOCAL ELECTRICAL CODE.
THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
TO CLEAN THE FIXTURE, TURN OFF THE POWER, WAIT FOR IT TO COOL, AND WIPE THE FIXTURE WITH A CLEAN, SOFT CLOTH.

NOTE: Product may not look exactly as shown in figures.

INSTALLATION

Attach Easy Connect™ mounting bracket to electrical box with electrical box screws (not included).
Option 1: Connect (push) electrical wires from electric box (house wiring) into correct inserts.
Option 2: For multiple green (ground), black (live) and white (neutral) wires joined in the electrical box (house wiring),attach a single “green”, “black” and “white” jumper wire before connecting. Strip 7mm from the 6” jumper wires supplied. Then connect (push) wires into the correct inserts.
Connect (push) electrical wires from fixture into correct inserts.
Tuck electrical wires into electrical box and position fixture over studs on mounting bracket assembly. Secure fixture in place with star washers and cap nuts.
Install specified bulb type and wattage (not included).
Screw the glass shade on to the fixture. Ensure the glass is securely attached to the fixture.
After installation, seal around the top and side perimeter between the fixture and the wall surface with weather resistant caulk. The bottom should be left un-caulked to prevent moisture build-up. Apply a small amount of weather resistant caulkaround the side perimeter between the cap nuts and mounting plate.