LENNOX CORE Service App Test and Balance/ Damper Setup Instructions
- October 30, 2023
- Lennox
Table of Contents
**LENNOX CORE Service App Test and Balance/ Damper Setup Instructions
**
COMMERCIAL TRAINING TOOLBOX TIPS
Lennox CORE Service App Test and Balance/Damper Setup
Applies to Lennox Model L and Enlight Rooftop Units 3-25 tons
Helpful Resources
- Download installation and service literature from LennoxCommercial.com or LennoxPros.com.
- CORE Service App Reference Guide takes you step-by-step through the startup and commissioning procedures.
- Log in to LennoxPros.com to start the online CORE Service Curriculum.
- View Lennox Model L and CORE Control System videos on YouTube.
Required Tools
The startup technician will use the CORE Service App to setup the unit for operation. Configure Damper Positions using the Test and Balance menu.
Pair your device to the Lennox CORE Control System to perform the damper setup steps.
See the excerpt from the CORE Service App Reference Guide below. Complete
instructions are included in the guide.
Download all Training Toolbox Tips
Register for Technical Training Webinars
Self-Service Technical Support with No Wait Times
Click on the black logos below to download these apps.
References
- Commercial Air Conditioning & Heating Units | Lennox Commercial
- LennoxPros - HVAC Lennox Supplier | LennoxPROs.com
- Commercial Air Conditioning & Heating Units | Lennox Commercial
- bit.ly/3Gy5uKH
- Lennox Commercial Technical Training
- Commercial Training Toolbox Tips
- Error during processing.