Sea Gull Lighting 65439 Academy Pendant Extra Large Instruction Manual

June 9, 2024
Sea Gull Lighting

GENERAL PRODUCT INFORMATION

These fixtures are intended to be installed utilizing NEC compliant junction boxes.
This product is safety listed for damp locations.

Incandescent version may be dimmed with a standard incandescent dimmer.
LED version may be dimmed with a LED dimmer. Consult lamp manufacturer for additional information.
This instruction shows a typical installation.

CAUTION – RISK OF FIRE
This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.

If you need installation assistance, replacement parts, or have questions regarding our warranty, please call our customer care center:

Install the Fixture

Sea Gull Lighting-65439-Academy-Pendant-Extra-Large-1

  1. Determine the wanted height or look of the fixture with the provided stems and assemble them by screwing them together. Note: At least 1 12” stem must be used to allow sufficient space for wiring.
  2. Feed the fixture wires through the stem assembly and screw the assembly to the socket assembly.
  3. Feed the fixture wires through the strain relief and canopy, then slide them down the stem assembly.
  4. Feed the fixture wires through the threaded nipple and screw the mounting plate assembly onto the stem assembly.
  5. Connect the fixture ground wire to a suitable ground in accordance to local electrical codes.
  6. Connect the white fixture wire (square and/or rigid) to the neutral power line wire with a wire nut.
  7. Connect the black fixture wire (round and/or smooth) to the hot power line wire with a wire nut.
  8. Align and secure the mounting plate to the junction box.
  9. Slide the canopy and strain relief up to the ceiling, then tighten the strain relief screw.
  10. Screw the lamp into the socket. Refer to the label on the socket for Max Wattage Information.
  11. Place the shade into the shade base and secure it with the shade screws. CAUTION: Over tightening the screws may cause the glass to break resulting in injury.

Warranty

Sea Gull Lighting fixtures and components, when properly installed and under normal conditions of use, are warranted to be free from defects in materials and workmanship for one year from date of sale. LED light sources are warranted for five years. ENERGY STAR® labeled products are warranted for three years.
Sea Gull Lighting at its sole option will repair or replace, F.O.B. Factory, freight prepaid, any Sea Gull Lighting product defective in materials or workmanship.
Such replacement is the exclusive remedy against Sea Gull Lighting should any of the products delivered prove defective. Invoices for labor charges and/or charge backs for labor will be denied unless prior written approval is given.
Any modification to a Sea Gull Lighting product not made at the factory will void the UL or ETL listing as well as the Sea Gull Lighting warranty policy.
To register your fixture, please visit our website: SeaGullLighting.com

7400 Linder Ave, Skokie, IL 60077
800.323.3226 – 847.626.6300
www.SeaGullLighting.com

© 2017 Sea Gull Lighting.All rights reserved.The “Sea Gull Lighting” graphic is a registered trademark of Sea Gull Lighting. Sea Gull Lighting reserves the right to change specifications for product improvements without notification.
A Generation Brands Company

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Sea Gull Lighting User Manuals

Related Manuals