Girmi PE26 Electric Hotplate User Manual
- June 13, 2024
- Girmi
Table of Contents
PE26 Electric Hotplate
User Manual
Mod.: PE26
Technical model: JB-3228A
Electric hotplate
PE26 Electric Hotplate
PROTECTION CLASSES
WARNING
ELECTRIC SHOCK RISK
DO NOT EXPOSE TO RAIN OR MOISTURE
This symbol warns the user that un-insulated dangerous voltage inside the
system may cause an electrical shock. Do not open the case.
** Class I Appliance symbol. This means the appliance must have the chassis
connected to electrical earth/ground by an earth conductor.
Caution:** this symbol reminds the user to read carefully the important
operations and maintenance instructions in this owner’s guide.
SAFETY INSTRUCTIONS
The following are important notes on the installation, use and maintenance;
save this instruction manual for future reference; use the equipment only as
specified in this guide; any other use is considered improper and dangerous;
therefore, the manufacturer cannot be held responsible in the event of damages
caused by improper, incorrect or unreasonable use.
Before use, ensure the equipment is undamaged; if in doubt, do not attempt to
use it and contact the authorized service center; do not leave packing
materials (i.e. plastic bags, polystyrene foam, nails, staples, etc.) within
the reach of children as they are potential sources of danger; always remember
that they must be separately collected. Make sure that the rating information
given on the technical label are compatible with those of the electricity
grid; the installation must be performed according to the manufacturer’s
instructions considering the maximum power of the appliance as shown on the
label; an incorrect installation may cause damage to people, animals or
things, for which the manufacturer cannot be considered responsible thereof.
If it is necessary to use adapters, multiple sockets or electrical extensions,
use only those that comply with current safety standards; in any case do not
exceed the power consumption limits indicated on the electrical adapter and /
or extensions, as well as the maximum power shown on multiple adaptor.
Do not leave the unit plugged; better to remove the plug from the mains when
the device is not in use. Always disconnect from power supply if you leave it
unattended.
Cleaning operations should be carried out after unplugging the unit.
If the unit is out of order and you do not want to fix it, it must be made
inoperable by cutting power cord.
– Do not allow the power cord to get closer to sharp objects or in contact
with hot surfaces; do not pull it to disconnect the plug.
– Do not use the appliance in the event of damage to the power cord, plug, or
in case of short circuits; to repair the product only address an authorized
service center.
– Do not handle or touch the appliance with wet hands or bare feet. Do not
expose the appliance to harmful weather conditions such as rain, moisture,
frost, etc.. Always store it in a dry place.
– This appliance cannot be used by children, even if they’re more than 8 years
old.
– This appliance can be used by persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if they received
supervision or instruction concerning use of appliance in a safe way and
understand the hazards involved.
– Children must not play with the appliance.
– Keep the appliance and its cord out of reach of children less than 8 years.
If the power cord is damaged, or in case of failure and / or malfunction do
not tamper with the unit. The reparation must be done by manufacturer or by
service center authorized by the manufacturer in order to prevent any risk.
Failure to comply with the above may compromise the unit safety and invalidate
the warranty.
WARNING: This appliance includes heating function. Surfaces, other than
functional surfaces may develop high temperatures. Since temperatures are
perceived differently by different people, this device should be used with
CAUTION. Hold the appliance exclusively to grip surfaces intended to be
touched.
– This appliance is intended to be used in household and similar applications
such as: staff kitchen areas in shops, offices and other working environments;
by clients in hotels, motels and other residential type environments; farm
houses, bed and breakfast type environments.
– The appliance is not intended to be operated by means of an external timer
or separate remote-control system.
– Before every use, unroll the power cord.
– Use original spare parts and accessories only.
– Do not subject the product to strong impacts, serious damages may result.
– Keep the unit away from flammable materials, heat, cold spots and steam,
curtains, paper.
GENERAL INFORMATION
When you first use the unit, the grill plates may emit some smoke. Do not
worry because after few uses the smoke will disappear.
Handle with care freshly-cooked food.
CAUTION: The hot plate is different from the gas one: after turning off
the product, plates remain hot for several minutes and should never be
touched.
Use the product only for the purpose for which it was designed; using pots or
containers suitable for cooking.
Use cooking containers suitable for the dimensions of the plates.
Never leave the appliance unattended while it is running.
Once finished using the appliance, unplug it and wait for the complete cooling
of each part before storing or cleaning the unit. Only use a soft sponge to
clean the plates.
Do not immerse the unit in water or other liquids. Do not leave it under the
stream of tap water. In any case avoid water or other liquids sliding on the
cooking surfaces.
Place the unit on a stable surface. Do not use as a support for objects.
When the unit is running, leave enough space on either side of the product.
Considering the high power of appliance, do not use multiple sockets to
connect it to the electrical outlet.
DESCRIPTION PE26
- Temperature control knob
- Temperature control light
- Main body
- Cooking plate
OPERATING
This electric cooking plate is suitable for cooking and heating many foods
using normal pots and pans.
– Place the unit on a flat and stable surface, leaving enough space at both
sides of the product, then connect the electric plug to the power outlet.
– Set the desired temperature by turning the temperature control knob (1) to a
position between 1 and 5. The temperature control light (2) will light on
indicating that the plate (4) is warming up, once the set temperature is
reached the light goes out, during normal operation, the light comes on
intermittently indicating that the temperature is maintained.
– When the light turns off, the plate is ready for cooking.
– During cooking it is advisable to periodically check the condition of the
food to prevent burning.
CAUTION: since it takes time to switch from high to low temperatures, the
plate cools down very slowly. Be careful to avoid overcooking or burning food.
– Once finished cooking, turn the knob (1) in “OFF” position, unplug the unit
and wait for complete cooling down of every part before starting cleaning
operations.
Cleaning should be carried out as described in the following paragraph; store
the unit away from heat sources
SETTING TEMPERATURE
Temperature control knob (1) allows selecting from 5 different levels of temperature.
- Heating and keeping warm
- Slow cooking
- Meat, vegetables and other foods which require slow cooking
- Pan frying
- Boiling water
CLEANING
Unplug the unit from the electrical outlet and allow the complete cooling
down of each part before starting the cleaning operations.
– Do not immerse the unit in water; do not leave it under the stream of tap
water. In any case, avoid water or other liquids sliding on the cooking
surfaces.
– Do not use scouring or metal pads for cleaning the plates.
– Clean the cooking plate with a damp sponge and dishwashing detergents.
– Clean the main body (3), the knob (1) and the cover with a damp cloth.
TECHNICAL FEATURES
- Power supply: AC 220-240V~50-60Hz. 1500W power
- Plate diameter: 18.5cm
- Temperature control light
WASTE OF ELECTRIC AND ELECTRONIC EQUIPMENT
The product is made of non-biodegradable and potentially polluting substances
if not properly disposed of; other parts can be recycled. It’s our duty to
contribute to the ecological health of the environment following the correct
procedures for disposal. The crossed out wheelie bin symbol indicates the
product complies with the requirements of the new directives introduced to
protect the environment (2002/96/EC, 2003/108/EC, 2002/95/EC, 2012/19/EC) and
must be properly disposed at the end of its lifetime. If you need further
information, ask for the dedicated waste disposal areas at your place of
residence. Who does not dispose of the product as specified in this section
shall be liable according to the law.
To find the nearest service center, please call the telephone number 0541
694246, fax number 0541 756430 or contact us at
assistenzatecnica@trevidea.it asking
for the service centers supervisor.
**** Appliance is conform to the pertinent European regulation and is
therefore marked with the CE mark.
www.girmi.it
TREVIDEA S.r.l.
TREVIDEA S.R.L. – Strada Consolare Rimini
San Marino n. 62 – 47924 – RIMINI
(RN) – ITALY
MADE IN CHINA
Documents / Resources
|
Girmi PE26 Electric
Hotplate
[pdf] User Manual
PE26 Electric Hotplate, PE26, Electric Hotplate, Hotplate
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>