CANARMNA IOL611 Easy Connect Wall Light Instruction Manual

CANARMNA IOL611 Easy Connect Wall Light

Product Information

Specifications

• Model: IOL611
• Date: 10/22
• Tools Required: Phillips Screwdriver, Wire Cutters
• Color Coding: Black (Live), White (Neutral), Green (Ground)

Product Usage Instructions

Safety Precautions

1. Turn off the electrical power before starting the installation of the light fixture.
2. Use wiring supplies as required by the local electrical code.
3. This product must be installed by a person familiar with the construction and operation of the product and the hazards involved.
4. To clean the fixture, turn off the power, wait for it to cool, and wipe the fixture with a clean, soft cloth.

Installation Steps

1. Attach nipple to the mounting bracket and secure in place with a hex nut.
2. Connect electrical wires from the house wiring into the correct inserts on the fixture.
3. If multiple wires are present, use a jumper wire to connect them before joining with the fixture.
4. Carefully tuck wires and wire nuts into the electrical box, ensuring no bare wires are visible.
5. Secure the fixture in place with a star washer and cap nut.
6. Position and secure the glass on the lamp using a spinner nut.
7. Install the appropriate bulb type and wattage (not included).
8. Seal around the fixture with weather-resistant caulk to prevent moisture build-up.

FAQ

• Q: What tools are required for installation?
  • A: You will need a Phillips Screwdriver and Wire Cutters for installation.
• Q: What precautions should be taken during installation?
  • A: Ensure to turn off electrical power, follow local wiring codes, and clean the fixture with caution.
• Q: How should I secure the glass on the lamp?
  • A: Position the glass on the lamp and secure it with a spinner nut, ensuring not to overtighten to prevent damage.

INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS READ ALL INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

TOOLS AND MATERIALS REQUIRED

SAFETY PRECAUTIONS

1. TURN OFF ELECTRICAL POWER BEFORE STARTING THE INSTALLATION OF THE LIGHT FIXTURE.
2. WIRING SUPPLIES AS REQUIRED BY LOCAL ELECTRICAL CODE.
3. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
4. TO CLEAN THE FIXTURE, TURN OFF THE POWER, WAIT FOR IT TO COOL, AND WIPE THE FIXTURE WITH A CLEAN, SOFT CLOTH.

NOTE: Product may not look exactly as shown in figures

INSTALLATION

1. Attach nipple to the mounting bracket. Adjust so it will clear hole in the back of the fixture and then lock the nipple in place with hex nut. Attach the mounting bracket to electrical box with electrical box screws (not included).
2. Option 1: Connect (push) electrical wires from the electric box (house wiring) into the correct inserts.
   • Option 2: For multiple green (ground), black (live) and white (neutral) wires joined in the electrical box (house wiring), attach a single “green”, “black” and “white” jumper wire before connecting. Strip 7mm from a 6 in. jumper wires supplied. Then connect (push) wires into the correct inserts.
3. Connect (push) electrical wires from the fixture into the correct inserts.
4. Once connections of wires are completed, carefully tuck wires and wire nuts into the electrical box making sure no bare wire (on the black and white) is visible at the wire nuts. Position hole in fixture over nipple and secure in  place with star washer and nut.
5. Remove the spinner nut from a socket. Position the glass on the lamp and secure with a spinner nut. (Please check the glass before installing for any cracks. Do not overtighten the spinner nut to attach the glass to the fixture.)
6. Install proper bulb type and wattage (not included).
7. After installation, seal around the top and side perimeter between the fixture and the wall surface with weather resistant caulk. The bottom should be left un-caulked to prevent moisture build-up. Apply a small amount of weather-resistant caulk around the side perimeter between the cap nut and mounting plate

• Tel: 613-342-5424,
• Fax: 800-263-4598

NEED HELP?

Call or Email us first

Our service team is ready to answer your questions…

• 1-800-265-1833 (English) / 1-800-567-2513 (French)
• Monda. -Monday
• IN CANADA
  • ressalescanada@canarmna.ca 
• IN USA
  • ressalesusa@canarmna.ca

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>