CANARMNA IVL1151A0112 Ryleigh 1 Light Articulating Wall Sconce Brushed Wall Lamp Instruction Manual

Table of Contents

Wall Lamp

CANARMNA-IVL1151A0112-Ryleigh-Light-Articulating-Wall-Sconce-Brushed-Wall-
Lamp-product

Specifications:

Safety Precautions:

Turn off the electrical power before starting the installation of the light fixture.
Use wiring supplies as required by local electrical code.
This product must be installed by a person familiar with the construction and operation of the product.
To clean the fixture, turn off the power, wait for it to cool, and wipe the fixture with a clean, soft cloth.

Installation:

Attach Easy ConnectTM mounting bracket to the electrical box with electrical box screws (not included).
Connect electrical wires from the electric box (house wiring) into the correct inserts.
Connect electrical wires from the fixture to the correct inserts.
Tuck wires and wire nuts into the electrical box making sure no bare wire is visible.
Attach the fixture to the mounting bracket by tightening the screws.
For multiple wires in the electrical box, use a jumper wire before connecting.
Position the glass on the lamp and secure it with a spinner nut. Do not overtighten the spinner nut.
Install proper bulb type and wattage (not included).

FAQ:

Q: Can I use a higher-wattage bulb than recommended?
A: It is recommended to use the specified wattage bulb to prevent overheating and potential damage to the fixture.
Q: What should I do if I notice any cracks on the glass?
A: Do not install the glass if it is cracked. Contact customer support for a replacement.
Q: Is it necessary to hire a professional for installation?
A: It is recommended to have the product installed by a person familiar with electrical work to ensure proper installation and safety.

INSTRUCTIONS ABOUT RISK OF FIRE OR INJURY TO PERSONS READ ALL INSTRUCTIONS

SAVE THESE INSTRUCTIONS

TOOLS AND MATERIALS REQUIRED: $CANARMNA-IVL1151A0112-Ryleigh-Light- Articulating-Wall-Sconce-Brushed-Wall-Lamp-fig- $3$$

TURN OFF THE ELECTRICAL POWER BEFORE STARTING THE INSTALLATION OF THE LIGHT FIXTURE.
WIRING SUPPLIES AS REQUIRED BY LOCAL ELECTRICAL CODE.
THIS PRODUCT MUST BE INSTALLED BY THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
TO CLEAN THE FIXTURE, TURN OFF THE POWER, WAIT FOR IT TO COOL, AND WIPE THE FIXTURE WITH A CLEAN, SOFT CLOTH.

NOTE : The product may not look exactly as shown in the figures.

$CANARMNA-IVL1151A0112-Ryleigh-Light-Articulating-Wall-Sconce-Brushed-Wall- Lamp-fig- $1$$

Attach Easy Connect™ mounting bracket to the electrical box with electrical box screws (not included).
Option 1: Connect (push) electrical wires from the electric box (house wiring) into the correct inserts.
Option 2: For multiple green (ground), black (live) and white (neutral) wires joined in the electrical box (house wiring), attach a single “green”, “black” and “white” jumper wire before connecting. Strip 7mm from the 6” jumper wires supplied. Then connect (push) wires into the correct inserts.
Connect (push) electrical wires from the fixture into the correct inserts.
Once connections of wires are completed, carefully tuck wires and wire nuts into the electrical box making sure no bare wire (on the black and white) is visible at the wire nuts.
Attach the fixture to the mounting bracket by tightening the 2 screws. $CANARMNA-IVL1151A0112-Ryleigh-Light-Articulating-Wall-Sconce-Brushed-Wall-Lamp-fig- $2$$
Remove the spinner nut from a socket. Position the glass on the lamp and secure with a spinner nut. (Please check the glass before installing for any cracks. Do not overtighten the spinner nut to attach the glass to the ˜fixture.)
Install proper bulb type and wattage (not included).

Tel : 613-342-5424,
Fax : 800-263-4598
Our service team is ready to answer your questions…
1-800-265-1833 (English) / 1-800-567-2513 (French) Monday – Friday 8 AM – 5 PM E.S.T.
IN CANADA – ressalescanada@canarmna.ca – IN USA – ressalesusa@canarmna.ca