TOOL KLEAN TK-2-OVP Anti Microbial UVC Oven Pro User Guide

USER’S GUIDE ANTI-MICROBIAL
UVC OVEN PRO
(TK-2-OVP)

SAFETY:

• Do not expose eyes or skin to UV Light.
• Keep out of reach of children.
• Unplug when not in use.
• Never pull plug out of outlet by the cord.
• Never use in a wet environment or put in water.
• Wear protective gloves to change UV bulb.
• When changing bulb do not force into sockets, gently twist
• If bulb breaks do not come in contact with glass, filaments, or mercury from bulb. Do not breathe in vapors from mercury.
• Never use cleaning solutions, water, or harsh towels to clean inside of Oven Pro.
• Do not touch or hit bulb while inserting tools into Oven Pro.

The Tool Klean Anti-Microbial Oven Pro (TK2-OVP) was tested in a laboratory controlled environment for 10 minutes resulting in (S. aureus) Staph bacteria kill at 99.9998%, (S. enterica) Salmonella bacteria kill at 99.9992%. These two more common bacteria strains are difficult to kill and the testing results showed outstanding performance by our Oven Pro! Microchem US Lab Testing Results:

Specifications:

• Unit Dimensions 9″H x 14″L x 8″W
• Unit Weight 9 lbs
• Boxed Dimensions 16.5″L x 10″W x 11″H
• Boxed Weight 10.5 lbs
• Power 15 Watts
• Input 110 V 50-60 HZ
• Cord Length 4.5 feet
• Bulb Efficiency
  • 8,000 hours
  • 253.7 nm
  • Intensity 1450 uW/cm2
  • Quartz glass
• Digital Display Timer 05 – 60 Min
• Safety Coating on Glass Door for Eye & Skin Protection
• Automatic shut-off when door is opened
• Wall Mount Ability
• 1 year limited warranty

Accessories Included:

Oven Pro kit includes a bulb cleaning cloth, and an extra 8 W UVC bulb

Maintenance:

• Cleaning – only use UVC Bulb Cleaning Cloth (included) to clean bulb of fingerprints, dirt, and debris.

• For cleaning interior surfaces use soft dry cloth or towel and Tool Klean Tool CleanR for optimum surface cleaning. Don’t use other sprays or water on interior surfaces as the residue will interfere with effectiveness of UVC light.

• Changing Bulb – Twist gently to line up bulb prongs for removal. Pull bulb downward with gloves or cloth.
  CAUTION: Only use Tool Klean Oven Pro Replacement UV Bulbs (TK-2-OVPB). Replace bulb by carefully lining up prongs and gently easing into place. Twist until you hear a click and the bulb is locked in place.

• When disposing of old bulb, refer to your state and local disposal requirements for hazard waste.

• If bulb breaks do not come in contact with glass, filaments, or vapors.

• For optimum efficiency, change bulb annually.

Trouble Shooting

(Always unplug before changing bulb or trouble shooting Oven Pro) Oven Pro does not turn on:

1. Unplug and plug back in to reset digital timer and switch.
2. Plug into different outlet.
3. Check electrical cord for damage

Bulb does not light:

1. If Oven Pro digital control lights up and bulb is not working, change bulb as per instructions under Maintenance.
2. If bulb still does not work, contact Tool Klean at info@toolklean.com 

Hand Tools:
The Tool Klean Anti-Microbial Oven Pro does not produce heat and is safe for any material.
Useage Times:
10 minute test results for optimum efficiency.
We suggest setting the Oven Pro at 5 minutes for rubber or plastic items. The digital timer allows 5 – 60 minutes.
Effectiveness:
The Oven Pro features a highly reflective interior surface which helps kills germs quickly and efficiently.
For optimum effectiveness, wipe surfaces from dust & debris before use, using a dry soft towel, cloth, or duster.

Directions For Use:

• Remove extra bulb
• Insert shelves sideways, corner to corner to fit through door opening
• Secure top shelf onto pre-installed pins located on the back wall and the side walls of Oven Pro for stabilization.
• Remove securing tape from bulb
• Plug electrical cord into Oven Pro
• Then plug into wall outlet
• Put tools in Oven Pro, close door
• Press ON/OFF switch to turn on
• Press timer button to select preferred time (5 – 60 min).
• When on, the UVC light can be seen through the logo on the front door of Oven Pro
• Store extra bulb safely and keep out of reach of children

Tool Klean is proud to be a USA company!
Our Products are US tested, produced, assembled, packaged, and labeled according to strict EPA regulations.

**** This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. If this equipment does cause harmful interference to radio communications, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna
2. Increase the separation between the equipment and receiver
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected,.
4. Consult the dealer or an experienced radio/TV for help.

This product may cause interference to radio equipment and should not be installed near maritime safety communications equipment or other critical navigation or communication equipment operating between 0.45-30 MHz.
This device complies with Part 18 of the FCC Rules:

Tool Klean EPA Registered # 94836
EPA Establishment #94836-NY-1
Microchem USA Lab Tested
Learn more about
Tool KIean Products at
www.toolklean.com

References

• Best UV Sanitizers & UVC Cleaning Devices | Tool Klean USA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>