CANARMNA LCH232A11 LED Chandelier Instruction Manual
- June 3, 2024
- CANARMNA
Table of Contents
LCH232A11 LED Chandelier
Instruction Manual
INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS READ ALL INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
SAFETY PRECAUTIONS:
- TURN OFF THE ELECTRICAL POWER BEFORE STARTING THE INSTALLATION OF THE LIGHT FIXTURE.
- THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
- CONNECT THE GROUND WIRE (BARE COPPER OR GREEN) FROM YOUR FIXTURE TO THE GROUND WIRE (BARE COPPER OR GREEN) OR GROUND SCREW IN THE ELECTRICAL OUTLET BOX.
- TO CLEAN THE FIXTURE, TURN OFF THE POWER, WAIT FOR IT TO COOL, AND WIPE THE FIXTURE WITH A CLEAN, SOFT CLOTH. CLEAN GLASS WITH WATER ONLY.
NOTE: The product may not look exactly as shown in the figures.
TOOLS AND MATERIALS REQUIRED:
Wiring supplies as required by local electrical code.
| Phillips Screwdriver
---|---
| Wire Cutters
| Pliers
| Wrench
INSTALLATION
-
Loosen “B”. Adjust the stud to the desired length and lock it in place with “B”. Mount the mounting bracket to the electrical box using electrical box screws (not included). Make sure the studs on the mounting bracket are facing out from the electrical box.
-
Adjusting the length of the flexible cord. For safety, do not release the knot inside the canopy.
-
Connect the ground wires (bare copper or green) from your fixture to the ground wire (bare copper or green) or ground screw in the electrical box. Connect the black wire from the fixture to the black wire in the electrical box and connect the white wire from the fixture to the white wire in the electrical box.
NOTE: Do not disconnect any pre-wired connections.
-
Once connections of wires are completed, carefully tuck wires and wire nuts into the electrical box making sure no bare wire (on the black and white) is visible at the wire nuts.
-
Position fixture over studs on mounting bracket assembly. A secure fixture in place with star washers and cap nuts. 5.
Dimmable
This LED light is compatible with the dimmers:
LEVITON# 742-6672-HLW, 722-6674-PDW MAX 150 W,
Lutron # SCL-153PH-WH MAX 150 W.
The MAX-rated wattage of this model is 20 W
NEED HELP?
Call or Email us first
Our service team is ready to answer your questions
1-800-265-1833 (English)
/1-800-567-2513 (French)
Monday – Friday
8.AM – 5 PM E.S.T
IN CANADA –
ressalescanada@canarmna.ca
IN USA- ressalesusa@canarmna.ca
Tel: 613-342-5424,
Fax: 800-263-4598
LCH232A11
10/21
Documents / Resources
|
CANARMNA LCH232A11 LED
Chandelier
[pdf] Instruction Manual
LCH232A11 LED Chandelier, LCH232A11, LED Chandelier, Chandelier
---|---