CANARMNA Ceiling/Wall Light Instruction Manual

CEILING/WALL
LIGHT
NEED HELP?
Call or email jus frist
Our service team is ready to answer your questions at 1-800-265-1833
IN CANADA- ressalescanada@canarmna.ca
IN USA – ressalesusa@canarmna.ca

INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS READ ALL INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS

TOOLS AND MATERIALS REQUIRED:

SAFETY PRECAUTIONS:

1. TURN OFF ELECTRICAL POWER BEFORE STARTING THE INSTALLATION OF THE LIGHT FIXTURE.
2. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
3. CONNECT THE GROUND WIRES (BARE COPPER OR GREEN) FROM YOUR FIXTURE TO THE GROUND WIRE (BARE COPPER OR GREEN) OR GROUND SCREW IN THE ELECTRICAL BOX.
4. TO CLEAN THE FIXTURE, TURN OFF THE POWER, WAIT FOR IT TO COOL, AND WIPE THE FIXTURE WITH A CLEAN, SOFT CLOTH.
   NOTE : The product may not look exactly as shown in the figures.

INSTALLATION:

1. Loosen “B”. Adjust stud to the desired length and lock in place with “B”. Mount the mounting bracket to electrical box using electrical box screws (not included). Make sure the studs on the mounting bracket are facing out from the electrical box.
2. Position the mounting bracket so that the fixture will be hung properly once it is mounted to the wall. Tighten the screws to hold them in place.
3. Adjust the length of the flexible cord. For safety, do not release the knot inside the canopy.
4. Connect the ground wires (bare copper or green) from your fixture to the ground wire (bare copper or green)  or ground screw in the electrical box. Connect the black wire from the fixture to the black wire in the electrical box and connect the white wire from the fixture to the white wire in the electrical box.
5. Once wire connections are completed, carefully tuck wires and wire nuts into the electrical box making sure no bare wire (on the black and white) is visible at the wire nuts.
6. Position fixture over studs on mounting bracket assembly. A secure fixture in place with star washers and cap nuts.
7. Install specified bulb type and wattage (not included).
8. Insert the socket plate into the glass shade as shown.
9. Position the socket plate in place and secure the cover with the center rod.

Tel:613-342-5424,
Fax:800-263-4598

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>