CANARMNA Chandelier Installation Guide

June 6, 2024
CANARMNA

CANARMNA Chandelier Installation Guide
CANARMNA Chandelier

TOOLS AND MATERIALS REQUIRED

Wiring supplies as required by local electrical code

  • Phillips Screwdriver
    Phillips Screwdriver

  • Wire Cutters
    Wire Cutters

  • Pliers
    Pliers

  • Wrench
    Wrench

SAFETY PRECAUTIONS

  1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.
  2. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
  3. CONNECT THE GROUND WIRES (BARE COPPER OR GREEN) FROM YOUR FIXTURE TO THE GROUND WIRE (BARE COPPER OR GREEN) OR GROUND SCREW IN THE ELECTRICAL BOX.
  4. TO CLEAN THE FIXTURE, TURN OFF THE POWER, WAIT FOR IT TO COOL, AND WIPE THE FIXTURE WITH A CLEAN, SOFT CLOTH.

NOTE: Product may not look exactly as shown in figures.

INSTALLATION

  1. Install the length of rod that is required by threading wire through the rod and screwing it to the fixture. Install swivel to the rod, ensuring that the sleeve is at the swivel.
    Installation Induction

  2. Loosen “B”. Adjust stud to desired length and lock in place with “B”.

  3. Mount the mounting bracket to outlet box using electrical box screws (not included). Make sure the studs on the mounting bracket are facing out from the electrical box.
    Installation Induction

  4. Connect the ground wires (bare copper or green) from your fixture to the ground wire (bare copper or green) or ground screw in the electrical box. Connect the black wire (or wire with marking) from the fixture to the black wire in the electrical box and connect the white wire from the fixture to the white wire in the electrical box.
    Installation Induction

  5. Once connections of wires are completed, carefully tuck wires and wire nuts into the electrical box making sure no bare wire (on the black and white) is visible at the wire nuts.

  6. Position fixture over studs on mounting bracket assembly.
    Secure fixture in place with star washers and cap nuts.

  7. Install specified bulb type and wattage (not included).

Customer Support

Our service team is ready to answer your questions…
Monday — Friday 8 AM – 5 PM E.S.T
1 -800-265-1 833 (English)
1-800-567-2513 (French)
IN CANADAressalescanada@canarmna.ca
IN USAressalesusa@canarmna.ca
Tel: 613-342-5424,
Fax: 800-263-4598

Company Logo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

CANARMNA User Manuals

Related Manuals