SLV 1003048 Pro Dali Pendant Light Instruction Manual
- June 3, 2024
- SLV
Table of Contents
SLV 1003048 Pro Dali Pendant Light
UNPACKING
SYMBOLS
INSTRUCTION MANUAL PART A
Operating Manual PART B
Pendant Light
1003048 …49 …50 …51
Read manual carefully and keep for further use!
Safety advices for installation and operation.
Disregard may lead to danger of life, burning or fire!
Any works on the electrical connection only by electrician.
Do not alter or modify the product.
Do not fasten anything on the product.
Do not cover the product.
Take out of service when suspecting a defect or malfunction and contact your
dealer or a qualified electrician.
Take measures that children get not harmed by the product.
Do not stare into the active light source.
Additional safety advices =
Use as directed
Safety class II (2) – Safety insulated – Connection without protective
conductor.
Operate only firmly fixed on an even surface.
Operate only on normal or not inflammable surfaces.
Operate only in dry indoor area.
Do not strain mechanically or expose to strong dirt contamination.
Admissible ambient temperature(ta): -20°C …+40°C.
Light Source
The light source of this luminaire may only be replaced by the manufacturer,
an authorized service technician or a comparable qualified person.
1003048 …50
This product contains a light source of the energy efficiency class E.
1003049 …51
This product contains light sources of the energy efficiency class D.
1003048
…49
…50
…51
Care / Storage
Disconnect product from mains and let it cool down.
Clean external surfaces regularly with a slightly moistened (water) cloth.
Store dry and clean.
The installation requires expert knowledge and may be carried out only by an approved electrician under consideration of local and national regulations!
The light source is only replaceable by a professional. The separate control unit is only replaceable by a professional.
Disposal (European Union)
Do not dispose the product with regular household waste! Products marked with
this sign must be disposed according to the directive (WEEE) on electrical and
electronic devices at local collection points for such devices!
Installation
Switch off mains / fixed connection cable!
Use only described accessories.
Use only suitable fastening materials.
Only suited for ceiling surface mounting.
Install as shown in the figure.
Adjust pendant length of the wires with the wire fixer. If necessary shorten
the pendant cable: Loosen strain relief(A). Disconnect wires and cut the
pendant cable. Connect as before (attach wire end ferrules if necessary!).
Secure strain relief. The pendant cable may not be strained. Carry out a
continuity test after shortening pendant cable.
Suitable Dimmer: DALI dimmer / light control. Note manufacturer`s
instructions.
Electrical connection
Equip flexible wire ends with suitable wire ferrules!
Live conductor Terminal L
Neutral conductor Terminal N
Connection lead with protective conductor: The green-yellow wire (protective
conductor) of the connection lead has to be tightly connected with clamp E of
the product.
Dali control wires Terminals DA
Check secure fixation and proper function!
© 14.07.2021 SLV GmbH, Daimlerstr. 21-23, 52531 Übach-Palenberg, Germany,
Tel. +49 (0)2451 4833-0. Made in China.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>