SLV 1007679 Ceiling Light Instruction Manual
- May 15, 2024
- SLV
Table of Contents
SLV 1007679 Ceiling Light Instruction Manual
The installation requires
expert knowledge and may be carried out only by an approved electrician under
consideration of local and national regulations!
The light source is not replaceable. The separate control unit is only
exchangeable by a professional.
Operating Manual PART B Ceiling Light 1007679
Read manual carefully and keep for further use!
Safety advices for installation and operation.
Disregard may lead to danger of life, burning or fire!
Any works on the electrical connection only by electrician.
Do not alter or modify the product.
Do not fasten anything on the product.
Do not cover the product.
Operate only with intact protection glass.
The supply cord cannot be replaced when damaged. Do not operate the product with a damaged supply cord. In this case the complete product must be disposed.
Take out of service when suspecting a defect or malfunction and contact your dealer or a qualified electrician.
Take measures that children get not harmed by the product.
Do not stare into the active light source.
Additional safety advice =
Use as directed
Safety class I (1) – Connection with protective conductor.
Operate only firmly fixed on an even surface.
Operate only on normal or not inflammable surfaces.
Operate only indoors.
Do not strain mechanically or expose to strong dirt contamination.
IP65: Protection against dust (dust-tight) – Protection against jetted
water from all directions.
Admissible ambient temperature(ta): -40°C …+40°C.
Light Source
The light source of this luminaire is not replaceable. In case that the light
source must be replaced (e.g. at the end of its lifetime) the whole luminaire
needs to be replaced.
This product contains a light source of the energy efficiency class D.
Care / Storage
Disconnect product from mains and let it cool down.
Clean external surfaces regularly with a slightly moistened (water) cloth.
Store dry and clean.
Installation
Switch off mains / fixed connection cable!
Use only described accessories.
Use only suitable fastening materials.
Only suited for ceiling surface mounting.
Install according to declared IP type.
Install as shown in the figure.
Electrical connection
Equip flexible wire ends with suitable wire ferrules!
Protect the connection applying an IP 68 connection box or cable connector (
e.g. SLV 228730).
Suitable terminal block: 400V, 16A, Pole: 3
Live conductor: Conductor L
Neutral conductor : Conductor N
Protective conductor: Conductor (PE)
Check secure fixation and proper function!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>