GLANGEH B1 USB Rechargeable and Sensor LED Headlamp User Manual
- June 14, 2024
- GLANGEH
Table of Contents
USER MANUAL
USB Rechargeable & Sensor LED Headlamp
B1 USB Rechargeable and Sensor LED Headlamp
LIGHT MODE
Standard White Light Mode
Important: in this mode the Hand Wave (Smart Sensor) will not workTo change
the light modes.
1st Click . 100%- white light 3h
2nd Click. 50%-white light 6h
3rd Click. 20%-white light 15h
4th Click. Off
Hold button for 2s,turn the mode to SOS.
Smart Sensor Mode
Press the Smart Sensor ON/OFF
Button and the top button sides will turn blue to confirm this mode. Now you
can wave your hand in front of the headlamp to turn it ON or OFF.
1 st Click 100% lighting sensor
2 nd Click Off
SPECIFICATION
| Material | Plastic | Battery | Built-in Li-Polymer Battery |
|---|---|---|---|
| Weight | 60g | ||
| Size | 533.6cm | Feature | Smart Sensor/Lightweight USB Rechargeable |
| Run time | 3-15h | ||
| Charge time | 3h |
Step 1| Remove the rubber cover. Using the included charging cord,
insert the micro-USB plug into the charging port on the bottom of the headlamp
as pictured above.
---|---
Step 2| Insert the standard USB end into a power source such as a
computer or block charger.
Step 3| If using an electrical outlet. The button sides will turn RED
while charging.Fully changed from RED to GREEN.
- It is recommended that you fully charge the battery before using the headlamp.
- To prolong the life of the battery it is best to recharge the battery BEFORE it is fully discharged.
- Avoid extreme temperatures especially heat.
- DO NOT attempt to open the battery compartment as this could damage the unit and will void the warranty.
WARNING!
Looking directly at an LED light can harm your eyes. We do not recommend this
product for children under six years old.