SLV 232294 Outdoor Floor Stand Luminaire Instruction Manual
- May 15, 2024
- SLV
Table of Contents
SLV 232294 Outdoor Floor Stand Luminaire
Product Specifications
- IP Rating: IP44
- Input Voltage: 220V – 240V ~50/60Hz
- Socket Type: GX53
- Maximum Wattage: 11W
- Dimensions: 19 x 75 x 19 cm
- Weight: 3.30 kg
Installation
- Switch off mains/fixed connection cable before starting the installation.
- Use only the described accessories and suitable fastening materials for installation.
- The luminaire is only suited for ground surface mounting.
- Follow local regulations for outdoor installations.
- Do not seal the product yourself with silicone.
- Install according to the declared IP type.
Electrical Connection
- Protect the connection using an IP 68 connection box or cable connector (e.g. SLV 228726).
- Ensure the terminal block meets the specifications: min. 400V, 16A, Pole: 3.
- Connect the Live conductor (L), Neutral conductor (N), and Protective conductor (PE) accordingly.
- Check for secure fixation and proper function after connection.
Care and Maintenance
- 1. Disconnect the product from mains and let it cool down before cleaning.
- Clean external surfaces regularly with a slightly moistened cloth. Do not use a pressure washer.
- Ensure the base is not covered with any materials and keep aeration/drainage openings free.
- Avoid exposure to acidic surroundings, high salt content in the air, cleaning agents, etc.
- Store the product in a dry and clean place when not in use.
Frequently Asked Questions (FAQ):
Q: Can I use a higher wattage bulb than the specified maximum?
A: It is recommended to strictly adhere to the maximum wattage limit mentioned
(11W) to avoid any damage to the luminaire.
INSTRUCTION MANUAL PART A Floor lamp
The installation requires expert knowledge and may be carried out only by an approved electrician under consideration of local and national regulations!
Operating Manual PART B Outdoor Floor Stand Luminaire 232294 …95
- Read manual carefully and keep for further use!
- Safety advices for installation and operation.
- Disregard may lead to danger of life, burning or fire!
- Any works on the electrical connection only by electrician.
- Do not alter or modify the product.
- Do not fasten anything on the product.
- Do not cover the product.
- Operate only with intact protection glass.
- The supply cord may not be covered with soil.
- If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or a qualified electrician to avoid hazard.
- Take out of service when suspecting a defect or malfunction and contact your dealer or a qualified electrician.
- Take measures that children get not harmed by the product.
Additional safety advices =
Use as directed
- Safety class I Connection with protective conductor.
- Operate only firmly fixed on an even surface.
- Operate only on normal or not inflammable surfaces.
- Do not strain mechanically or expose to strong dirt contamination.
- IP44: Protection against foreign objects > Ø 1,0mm – Protection against splashing water from all directions.
Lamp replacement
- Disconnect luminaire from mains and let it cool down.
- Suitable light sources: GX53, 11W max.
Care / Storage
- Disconnect product from mains and let it cool down.
- Clean external surfaces regularly with a slightly moistened (water) cloth. The base may not be covered (e.g. with foliage, soil, etc.)
- Do not clean with pressure washer.
- Openings providing aeration or drainage must be kept free.
- The following influences may have unwanted effects on the product: acidic surroundings, high salt content in the air, cleaning agents, fertilizer, thawing salt, chemicals. Store dry and clean.
Installation
- Switch off mains / fixed connection cable!
- Use only described accessories.
- Use only suitable fastening materials.
- Only suited for ground surface mounting.
Follow local regulations for outdoor installations.
- Do not seal the product yourself (e.g. with silicone).
- Install according to declared IP type.
- Install as shown in the figure.
Types of fixation
- Fixation with screws (not included in delivery).
- Concrete anchor (supplied): to be casted into concrete.
- The external flexible cable of the luminaire may not come into directcontact with soil.
- Place the power supply cord into a conduit.
Electrical connection
- Protect the connection applying an IP 68 connection box or cable
- connector (e.g. SLV 228726).
- Suitable terminal block: min. 400V, 16A, Pole: 3
- Live conductor Conductor L
- Neutral conductor Conductor N
- Protective conductor
- Conductor (PE)
- Check secure fixation and proper function!
© 0001 03.07.2023 SLV GmbH, Daimlerstr. 21-23, 52531 Übach-Palenberg, Germany, Tel. +49 (0)2451 4833-0. Made in China.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>