SLV 1002147 FITU WL Indoor Instruction Manual
- May 15, 2024
- SLV
Table of Contents
SLV 1002147 FITU WL Indoor
Specifications
- Input Voltage: 220V – 240V
- Frequency: 50/60Hz
- Socket Type: E27
- Maximum Wattage: 24W
- Dimensions: 21 x 12 x 11.4 cm
- Weight: 0.81 kg
Safety Instructions
The installation should be done by an approved electrician following local
and national regulations to avoid risks of life, burning, or fire
Do not modify the product, fasten anything on it, or cover it. If any defect
is suspected, contact a dealer or qualified electrician immediately.
Ensure children are not harmed by the product.
Lamp Replacement
Disconnect the luminaire from the mains and let it cool down before
replacing the lamp. Use only E27 bulbs with a maximum of 24W.}
Care and Storage
Disconnect the product from the mains for cleaning. Clean external surfaces
regularly with a slightly moistened cloth. Store the product in a dry and
clean place.
Installation
Switch off the mains power before installation. Use only the specified
accessories and suitable fastening materials. The product is designed for wall
surface mounting as shown in the figure.
Electrical Connection
Equip wires of the fixed wiring with protective tubes and flexible wire
ends with suitable wire ferrules. Check for secure fixation and proper
function after connection.
FAQ
-
What type of light bulb should I use with this product?
Use E27 bulbs with a maximum wattage of 24W. -
Can I install this product myself?
No, the installation should be done by an approved electrician following local and national regulations. -
How should I clean and store the product?
Clean external surfaces regularly with a slightly moistened cloth. Store the product in a dry and clean place.
Instruction
INSTRUCTION MANUAL PART A Wall Light
The installation
requires expert knowledge and may be carried out only by an approved
electrician under consideration of local and national regulations!
Operating Manual PART B
Wall Light
1002147 …48 …49
- Read manual carefully and keep for further use!
- Safety advices for installation and operation.
- Disregard may lead to danger of life, burning or fire!
- Any works on the electrical connection only by the electrician.
- Do not alter or modify the product.
- Do not fasten anything on the product.
- Do not cover the product.
- Take out of service when suspecting a defect or malfunction and contact your dealer or a qualified electrician.
- Take measures that children get not harmed by the product.
Additional safety advices
Use as directed
- Safety class I ( ) – Connection with protective conductor.
- Operate only firmly fixed on an even surface.
- Operate only on normal or not inflammable surfaces.
- Operate only in dry indoor area.
- Do not strain mechanically or expose to strong dirt contamination.
- Max. admissible ambient temperature(ta): 30°C.
Lamp replacement
Disconnect luminaire from mains and let it cool down.
Suitable light sources: E27, 24W max.
Care / Storage
Disconnect product from mains and let it cool down.
Clean external surfaces regularly with a slightly moistened (water) cloth.
Store dry and clean.
Installation
- Switch off mains / fixed connection cable!
- Use only described accessories.
- Use only suitable fastening materials.
- Only suited for wall surface mounting.
- Install as shown in the figure.
Electrical connection
- Equip wires of the fixed wiring with protective tubes.
- Equip flexible wire ends with suitable wire ferrules!
- Live conductor Terminal L
- Neutral conductor Terminal N
- Protective conductor Earth terminal
Check secure fixation and proper function!
© 10.01.2023 SLV GmbH, Daimlerstr. 21-23, 52531 Übach-Palenberg, Germany,
Tel. +49 (0)2451 4833-0. Made in China.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>