MOUNTUP MP0053 Tilting TV Wall Mount Instruction Manual
- October 30, 2023
- MOUNTUP
Table of Contents
**MOUNTUP MP0053 Tilting TV Wall Mount Instruction Manual
**
Safety Caution
Please read this instruction carefully before installation.
If you do not understand these instructions or have doubts about the safety of
the installation, assembly or use of this product, please contact us.
- This product is designed for use in wood stud or solid concrete wall.
- DO NOT install into drywall alone.
- The wall must be capable of supporting five times the weight of the TV and mount combined.
- Incorrect installation may result in product damage or body injury.
WARNING: This product contains small items that could be a choking hazard
if swallowed.
Before starting assembly, verify all parts are included and undamaged. If any
parts are missing or damaged, do not return the damaged item to your dealer;
please contact our customer service team. Never use damaged parts!
Must Check Before Getting Started
Drywall with wood studs
Solid concrete wall
CAUTION: DO NOT install into drywall alone.
Extra Tools You Need (Not Supplied)
For Wood Studs
Stud Finder
**Awl
7/32″ (5.5mm) Wood Drill Bit
**
For Concrete Wall
3/8″ (10mm) Masonry Drill Bit
Hammer
-
Band Tape
-
Pencil
-
Electro drill
-
Socket Wrench
-
Screw driver
Supplied Parts and Hardware
Wall Plate H ×1
TV Brackets
Hardware
-
Lag Bolt M8x65mm A ×4
-
Washer Ø8 B ×4
-
Allen Key M4 C ×1
TV Screws / Spacers / Washers
-
Philips Screws M4 x 12mm M4 x 30mm MA ×4
-
Philips Screws M6 x 15mm M6 x 30mm MB ×4
-
Philips Screws M8 x 25mm M8 x 45mm MC ×4
-
Spacers L10mm MD ×8
-
Washers Ø6mm M4-5-6 ME ×4
-
Spacers L5mm MF ×8
Product Dimensions
Attach the TV Brackets
Select TV Screws
Too Short
Too Long
Not Vertical
Correct
Correct
Need Spacer
Yes, choose the appropriate screws, washers,and spacers for your TV.
For more spacing between bracket and TV
For raised back TV
For Counter bore of TV
To avoid the blocked input
No, just choose the screws, washers
Attach the TV Brackets
Attach Wall Plate to Wall
OPTION A: Wood Stud Installation
CAUTION: To avoid potential personal injury or property damage:
All 4 lag bolts MUST BE firmly tightened to prevent unwanted movement of the
wall plate assembly. Ensure the wall plate assembly is securely fastened to
the wall before continuing on to the next step.
Install wall plate using lag bolts and washer with Socket Wrench, NO Electro
drill.
CAUTION:
Do not use in drywall or wood.
OPTION B: Solid Concrete Wall Installation
CAUTION: To avoid potential personal injury or property damage:
All 4 lag bolts MUST BE firmly tightened to prevent unwanted movement of the
wall plate assembly. Ensure the wall plate assembly is securely fastened to
the wall before continuing on to the next step.
Install wall plate using lag bolts, washer and anchor with Socket Wrench, NO Electro drill.
Adjustments
Tilting adjustment (-10°~0°)
Pull brackets to your desired angle then fasten 2 titing bolts with Allen Key
(G).
Option:
To keep TV in vertical position, please use two M4 screws to insert the holes
on two brackets respectively
Hang and Secure TV to Wall Plate
Wall Plate Installation Integrity Test
Before hanging TV, please conduct “wall plate installation integrity test”
firstly.
Hang and Secure TV to Wall Plate
Hang on top of Wall Plate
Lock to the bottom of the Wall Plate
Take down the TV from the Mount (If necessary)
Push it back to restore default settings before re-hanging back.
