SLV 233134 Display Light Instruction Manual

SLV 233134 Display Light

Product Information

Specifications:

• Input Voltage: 220V-240V AC, 50/60Hz
• Lamp Socket: GU10
• IP Rating: IP55
• Maximum Power: 50W
• Weight: 0.73 kg

Product Usage Instructions:

Safety Instructions:
Installation of the product should be done by a qualified electrician following local regulations. Do not alter or modify the product in any way. Ensure the product is operated with intact protection glass and on a stable surface.

Lamp Replacement:
Disconnect the luminaire from the mains and allow it to cool down before replacing the lamp. Use only suitable light sources with a maximum power of 50W. Clean the gasket when dirty.

Care and Storage:
Disconnect the product from the mains before cleaning. Regularly clean external surfaces with a slightly moistened cloth. Avoid using pressure washers and ensure aeration openings are clear. Store the product in a dry and clean environment.

Installation:
Switch off the mains power before installation. Use only recommended accessories and fastening materials. The product is suitable for wall surface mounting at a minimum height of 2.50m when using halogen lamps. Follow local regulations for outdoor installations and maintain proper distance from illuminated surfaces.

Electrical Connection:
Ensure the fixed wiring is directed at least 15mm into the housing. Equip flexible wire ends with suitable wire ferrules. Check for secure fixation and proper function of live, neutral, and protective conductors.

FAQ:

• Q: Can I replace the lamp with any GU10 bulb?
  A: Only use GU10 bulbs with a maximum power of 50W to ensure safe operation.

• Q: How often should I clean the product?
  A: Clean external surfaces regularly with a slightly moistened cloth to maintain optimal performance.

• Q: What should I do if I suspect a defect in the product?
  A: Take the product out of service immediately and contact your dealer or a qualified electrician for assistance.

Specification

Hardware

The installation requires expert knowledge and may be carried out only by an approved electrician under consideration of local and national regulations! Technical Details are subject to change.

Safety Instruction

• Read the manual carefully and keep it for further use!
• Safety advice for installation and operation.
• Disregarding may lead to danger of life, burning, or fire!
• Any work on the electrical connection only by the electrician.
• Do not alter or modify the product.
• Do not fasten anything on the product.
• Do not cover the product.
• Operate only with intact protection glass.
• Take out of service when suspecting a defect or malfunction and contact your dealer or a qualified electrician.
• Take measures that children are not harmed by the product.
• Additional safety advice =

Use as directed

• Safety class I (1) – Connection with protective conductor.
• Operate only firmly fixed on an even surface.
• Operate only on normal or not inflammable surfaces.
• Do not strain mechanically or expose to strong dirt contamination.
• A minimum distance of the light source to the illuminated surface: 0,5 m.
• IP55: Protection against disturbing dust deposition – Protection against jetted water from all directions.

Lamp replacement

• Disconnect the luminaire from the mains and let it cool down.
• Suitable light sources: GU10, 50W max.
• Clean gasket when dirty.

Care/Storage

• Disconnect the product from the mains and let it cool down.
• Clean external surfaces regularly with a slightly moistened (water) cloth.
• Do not clean with a pressure washer.
• Openings providing aeration or drainage must be kept free.
• The following influences may have unwanted effects on the product: acidic surroundings, high salt content in the air, cleaning agents, fertilizer, thawing salt, and chemicals.
• Store dry and clean.

Installation

• Switch off mains / fixed connection cable!
• Use only described accessories.
• Use only suitable fastening materials.
• Only suited for wall surface mounting.
• Install and operate at a minimum height of 2,50 m only when using halogen lamps.
• Note the distance to the illuminated surface.
• Follow local regulations for outdoor installations.
• Do not seal the product yourself (e.g. with silicone).
• Install according to the declared IP type.
• Install as shown in the figure.

Electrical Connection

Direct the fixed wiring with its complete insulation at least 15 mm into the housing.

Equip flexible wire ends with suitable wire ferrules!

• Live conductor ⇒ Terminal L
• Neutral conductor ⇒ Terminal N
• Protective conductor ⇒ Earth terminal

Check secure fixation and proper function!

© 06.01.2022 SLV GmbH, Daimlerstr. 21-23, 52531 Übach-Palenberg, Germany, Tel. +49 (0)2451 4833-0. Made in China.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>