SLV 1002558 Pendant Light Instruction Manual

SLV 1002558 Pendant Light

Specifications

• Model Numbers: 1002558, 1002559, 1002560, 1002561
• Compatible Bulb Type: E27, max 60W
• Safety Class: II (2)
• Installation: Requires expert electrician
• Usage: Indoor dry areas only

Technical Details are subject to change

Installation

1. Ensure the power supply is switched off before installation.
2. Installation should be carried out by an approved electrician following local regulations.
3. Use only described accessories for installation.
4. Connect the product with a suitable track adapter or ceiling canopy as directed in the manual.
5. The installation requires expert knowledge and may be carried out only by an approved electrician under consideration of local and national regulations!
6. Switch off mains / fixed connection cable!
7. Use only described accessories.
8. Connect the product with a suitable track adapter (see fig.) or a suitable ceiling canopy (see fig.).
9. Notice supplied manuals.

Electrical Connection

Refer to the provided figure for the electrical connection. Connect only to the load terminal (LOAD) and equip flexible wire ends with suitable wire ferrules for a secure connection.

Lamp Replacement

1. Disconnect the luminaire from the mains.
2. Allow the luminaire to cool down before replacing the lamp.
3. Use only compatible light sources: E27, max 60W.

Care and Storage

1. Disconnect the product from the mains before cleaning or storing.
2. Clean external surfaces regularly with a slightly moistened cloth.
3. Store the product in a dry and clean environment.

Operating Manual PART B

• Pendant Light 1002558 …62 …63 …64
• Read the manual carefully and keep it for further use!
• Safety advice for installation and operation.
• Disregarding may lead to danger of life, burning or fire!
• Any work on the electrical connection only by the electrician.
• Do not alter or modify the product.
• Do not fasten anything on the product.
• Do not cover the product.
• The supply cord cannot be replaced when damaged. Do not operate the product with a damaged supply cord.
• In this case, the complete product must be disposed of.
• Take out of service when suspecting a defect or malfunction and contact your dealer or a qualified electrician.
• Take measures that children are not harmed by the product.
• Additional safety advice =

Use as directed

• Use only in combination with a suitable track adapter or a ceiling canopy.
• Safety class II (2) – Safety insulated – Connection without a protective conductor.
• Operate only in dry indoor areas.
• Do not strain mechanically or expose to strong dirt contamination.
• Lamp replacement
• Disconnect the luminaire from the mains and let it cool down.
• Suitable light sources: E27, 60W max.

Care / Storage
Disconnect the product from the mains and let it cool down. Clean external surfaces regularly with a slightly moistened (water) cloth. Store dry and clean.
For electrical connection see figure.

Connection only on load terminal (LOAD)
Equip flexible wire ends with suitable wire ferrules! Check secure fixation and proper function!
30.11.2022 SLV GmbH, Daimlerstr. 21-23, 52531 Übach-Palenberg, Germany, Tel. +49 (0)2451 4833-0. Made in China.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>