mPTech 202108 Digital Camera for Kids User Manual

: June 9, 2024
: mptech

mPTech 202108 Digital Camera for Kids

202108 Digital Camera for Kids

Safety of use

Read these guidelines carefully. Not following them may be dangerous or illegal.

—CHILDREN—
Keep the device, its accessories and packaging out of reach of children. Cables and plastic packaging may wrap around the child’s neck or be swallowed, resulting in suffocation or choking.

—DO NOT RISK—
Do not use the device near flammable fabrics. Do not use the product with visible mechanical damage.

—QUALIFIED SERVICE—
This product may only be repaired by qualified service personnel of the manufacturer or by an authorised service centre. Repairing the device by an unqualified or unauthorized service technician may result in damage to the device and void the warranty. The manufacturer is not responsible for problems caused by unauthorized modifications to the equipment made by the user.
—PHYSICALLY OR MENTALLY DISABLED PEOPLE—
This device should not be operated by people (including children) with limited physical or
mental abilities, as well as by people with no earlier experience in operation of electronic equipment. They may only use it under the supervision of persons responsible for their safety after they have read and understood the instructions for safe use.
—WATER AND OTHER LIQUIDS—
Protect the device from water and other liquids. Avoid using the device in environments with high humidity like kitchens or bathrooms. Water particles may cause moisture to appear in the device, which adversely affects the electronics and may cause damage to the equipment.
—SURROUNDINGS—
The device should not be used in dusty conditions. Connect the power supply cable of the
device in such manner that it cannot be damaged or endanger people or animals. Do not
expose the device to sunlight and do not use it or leave it in close proximity to heat generating devices (heaters, radiators etc.). Plastic parts may deform, which may affect the operation of the device or cause it to break down completely. Do not expose the thermal paper to prolonged sunlight or high temperatures – this may wear it out.
—BATTERY—
Avoid exposing the battery to very high/low temperatures (0ºC – 45 ºC / 32ºF – 113ºF).
Extreme temperatures may influence capacity and battery life. Avoid contact with liquids and metal objects as it may cause partial or complete battery damage. The battery should be used according to its purpose. Do not destroy, impair or throw the battery into flames
– it might be dangerous and may cause fire. Worn-out or impaired battery should be placed in a dedicated container. Excessive charging the battery can cause damage.
Therefore do not charge longer than necessary. The battery in the device is not replaceable by the user.

Technical Specification

Technical data

Digital camera for kids|
---|---
Model| EB-620312
Photos resolution| 640×480 (VGA),1600×1200 (2M), 2048×1536 (3M)
Video resolution| 1280×720, 1920×1080
Power supply| 5V ⎓ 0,5A
Battery| Li-ion 3,7V⎓ 600 mAh, 2.22
Additional| 1GB microSD card, USB cable, pouch with adjustable strap

Package content

Digital camera for kids
USB cable
Case
Adjustable etui strap
1 GB microSD card
USER MANUAL

If any of the above items is missing or damaged, please contact your dealer

We advise to keep the container in case of any complaints.

The latest manual available on the website:
https://mptech.eu/qr/hykker/
To open this page simply scan this QR Code.

Digital camera for kids

Device construction

Shutter
Speaker
Microphone
Camera lens
LCD display
LED status
ON/OFF button
Button up
Right button
Button left
Button down
micro USB connector
Memory cards slot
Emergency switch

The use of the equipment

Charging the battery

The battery should be fully charged before the first use of product. Several charging and discharging cycles may be necessary to achieve full battery capacity.
Avoid excessive battery discharge. This can damage the battery or shorten its service life.
The device can heat up during charging. It is a regular occurrence and should not affect the stability or performance of the device. Do not leave the device to be charged unattended as this may result in fire, damage to the device or its surroundings etc.

To charge your device, connect the microUSB plug of the supplied cable to the charging socket (12) on your device. Connect the other end of the cable to a powered USB adapter or, for example, a powerbank. (none of these power supply devices are included), which guarantee a power supply of 5 V ⎓ 0.5 A or higher at the output. When charging starts, the LED diode (6) lights up red and blue. When charging is complete, the red status LED turns off. Disconnect power cable from the device and from the power source.

Connecting the switched-on camera to a USB port on a computer activates the data transmission mode, during which normal use of the device is not possible. Once disconnected from a computer the device will switch on.

Switching on/off, memory card installation

Press and hold the ON/OFF button (7) for approx. 3 seconds to switch the device on or off. When the camera is switched on, the status LED (6) lights up blue and the main menu starts.

In case the device gets blocked (no response to pressing buttons, etc.), it is possible to
switch it off in an emergency. To do this, insert a thin, elongated object (e.g. a pin) into the
opening of the emergency stop button (14). The camera will switch off instantly.

The main menu of the device
The icons:
A) Taking pictures
B) Video recording
C) Viewing photos and video
D) Settings
E) Games
F) Music playback

Use the up (8), down (11), left (10)and right (9) buttons to navigate the main menu. The shutter button is responsible for selecting the currently selected item. The ON/OFF button returns to the main menu from the currently selected operating mode.

The camera supports memory cards up to 32GB.

A memory card must be installed in the device to be able to record videos and take pictures

Insert the microSD memory card into the memory card slot (13) with the gold contacts facing the back of the device), pressing until you hear a click.
To remove the card, lightly press it into the slot and the memory card slot mechanism will eject the card allowing it to be removed.
If the memory card has not been formatted before, format it using the corresponding option in the settings menu (chapter 4.3). Please note that formatting memory cards erases all data from them!

Use the up (8) and down (11) buttons to navigate through the settings menu. The shutter button (1) selects and confirms options, the ON/OFF button (7) cancels the selection and goes back in the menu.

Size – for the resolution of pictures taken; available values: VGA, 2M, 3M.
Self-timer – is responsible for setting the self-timer delay; available values: off
(no limit), 2s, 5s, 10s.
Resolution – controls the resolution of recorded video; available values: 1080p, 720p.
Time Stamp – responsible for placing a date and time stamp on your images.
Language – is responsible for the language used in the device.
LCD off – responsible for automatic switching off the display after the set time of inactivity; available values: switch off (the display does not switch off), 1 min., 2 min., 3 min.
Auto off – responsible for automatic switching off of the device after the set time of inactivity; available times: off (the device does not switch off automatically), 3 min., 5 min.
Volume – adjusts the volume of the device; values from 0 to 7.
Format – is responsible for formatting the memory card installed in the camera.
Date and time – is responsible for setting the date and time of the device.
Sys. Reset – you can return to factory settings here.
Version – you can check version of software here.

Taking pictures

From main menu enter taking pictures (A). In this mode, long-pressing the up (8) or down (11) buttons respectively increases or decreases the digital zoom level between 1.0x and 4.0x. Briefly pressing the up button turns the self- timer on or off, the delay of which can be set in the settings menu (chapter 4.3). Use the right (9) and left (10) buttons to select from a range of options for adding variety to the frame. There are frames, effects and filters to choose from. Photos are taken by pressing the shutter button (1).

Video recording

Select Movie recording (B) from the main menu. In this mode, pressing the up button (8) toggles between normal, slow and fast movie recording speeds. Use the right (9) and left (10) buttons to select one of six image filters. Recording is started and stopped by pressing the shutter button (1).

Viewing photos and video

From the main menu, select Browse videos and photos (C). View the materials using the right (9) and left (10) buttons. Selected movies or photos can be deleted one by one by pressing the up button (8) on the selected file and confirming the selection of “Execute” by pressing the shutter button (1). It is also possible to delete all files by pressing the down button (11) and confirming the selection of “Execute” by pressing the shutter button (1).
From main menu enter Games (E). Using right (9) and left (10) buttons choose one of four available games:

Snake – feed the snake being careful not to bump into a wall or eat its tail
Push the box – move the boxes to the fields indicated by the blue circle on the board
Labyrinth – Find a way out of the maze.
2048 – move and connect blocks appearing on the board to create a block with the number 2048.

Control in all games is by using the up (8), right (9), left (10), down (11) buttons.

Music playback

From main menu enter Music (F). The player supports MP3 files and will automatically start playing files detected on the memory card. Switch between files using the right (9) and left (10) buttons. The up (8) and down (11) buttons are responsible for increasing and decreasing the volume of the files being played. Shutter button (1) pauses and resumes music playback.

Troubleshooting

If you have problems with the unit, please refer to the following tips.

I cannot switch the device on	Make sure the battery is charged.
Charging does not work	Make sure power supply is working correctly. Check if

the power cord is working. If the checked power cable does not charge, please contact the manufacturer’s hotline.
The device does not recognize the memory card| Check if the memory card is not impaired. Check that the card is formatted in a FAT or FAT32 file system. Make sure, the capacity of the memory card does not exceed 32 GB.
The device does not take photos or record videos.| Make sure that a working memory card with the correct capacity and compatible file system is installed in the camera (see above).
The device does not respond to the buttons pressed, it has frozen.| Insert a thin, elongated object (e.g. a pin) into the opening of the emergency stop button (14). The camera will switch off instantly. Start again and see if the problem still occurs. If it does, please contact the manufacturer’s service department.
If the problem persists, contact the manufacturer’s service department.

Maintenance of the device

To extend the service life of the device:

For cleaning use only a dry cloth. Never use any agent with a high concentration of acids, alkalis or abrasives.
Keep the device and its accessories out of reach of children.
Avoid very high temperatures, for it can shorten the life of electric and electronic components, melt the plastic parts and destroy the battery.

The packaging of the device can be recycled in accordance with local regulations.
Symbol for cardboard (packaging material).
The packaging elements should be disposed of in appropriate containers.
The marking of the container into which the box – paper should be discarded.
Marking of the container to which the draw piece should be disposed of – plastic/metal

Correct disposal of used equipment and battery

The device is marked with a crossed-out garbage bin, in accordance with the European Directive 2012/19/EU on used electrical and electronic Equipment (Waste Electrical and Electronic equipment – WEEE). Products marked with this symbol should not be disposed of or dumped with other household waste after a period of use. The user is obliged to get rid of used electrical and electronic equipment by delivering it to designated recycling point in which dangerous waste are being recycled. Collecting this type of waste in designated locations, and the actual process of their recovery contribute to the protection of natural resources. Proper disposal of used electrical and electronic equipment is beneficial to human health and environment. To obtain information on where and how to dispose of used electrical and electronic equipment in an environmentally friendly manner user should contact their local government office, the waste collection point, or point of sale, where the equipment was purchased.

According to the EU directive 2006/66/EC with changes contained in EU directive 2013/56/UE on the disposal of batteries, this product is marked with crossed-out garbage bin symbol. The symbol indicates that the batteries used in this product should not be disposed with regular household waste, but treated according to the legal directives and local regulations. It is not allowed to dispose of accumulators with unsorted municipal waste. Users of batteries and accumulators must use the available collection points of these items, which allows them to return, recycle and disposal. Within the EU, the collection and recycling of batteries and accumulators is a subject to separate procedures. To learn more about existing procedures of recycling of batteries and accumulators please contact your local office or an institution for waste disposal or landfill.

The use of the manual

Without prior written consent of the manufacturer, no part of this manual may be photocopied, reproduced, translated or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or storing in any systems of
storing and sharing information.
All brand names and product names are trademarks or registered trademarks of their respective companies.

Warranty and service

The product is covered by a 3-year warranty, counting from the date of sale of the product. If you need to make use of a warranty claim, please contact the manufacturer’s helpline or point of sale. The product returned for warranty claim should be complete and in its original packaging

Declaration of conformity with European Union Directives

mPTech sp. z o.o. hereby declares that the product complies with all relevant provisions of the so-called the ‘New Approach’ Directive of the European Union.