KuWFi 25126 4G CPE LTE Router User Manual

KuWFi 25126 4G CPE LTE Router

Interface description

1. RJ45 Port: LAN0 In standard routing mode, LAN can be used as WAN.

2. RJ45 Port: LAN1LAN2LAN3

3. DC/USB Power Port: DC/5V, USB/5V
   DC Port use 2.5mmStandard round head power supply PortUSB use Micro USB Port.

4. External WIFI Antenna Port: SMA screw hole Port

5. RESET: Press this button for 5 seconds at startup,SYS light will flash, then restart it, Reset successfully.

6. USB Port: USB2.0

7. SIM: The SIM slot is located at the top of the product, The SIM card can be installed by pushing the lid off the lid.

Indicator light status description

Set to Prepare

Connect device
You can connect your computer and modem under the below steps.

Set the Computer IP Address
Before accessing the Web Settings page.It is recommended that you set the computer to “automatically obtain IP address” and “automatically obtain DNS server address”.The IP address is automatically assigned by the router.If you need to specify a static IP address to the computer.The IP address of the computer should be set in the same subnet as the LAN port IP address of the router (the router’s LAN port default IP address is 192.168.0.1, The subnet mask is:255.255.255.0.

Connected by WiFi
Detect the wireless network connection of the wireless router,Then click the ‘connect’ butt on to establish the connection.The WiFi Password is 12345678

Make sure the computer is connected to the router
When your computer shows that IP has been successfully obtained,Please use the Ping command to confirm whether the computer and the router are connected successfully.

For example, in a Windows XP environment. Perform Ping command Ping 192.168.0.1
If the screen is shown below.Indicates that the computer has successfully connected with the router.

Landing router
Next you will log on to the router Web Settings page. Enter “192.168.0.1” in the Web browser address bar,,Enter the login user name and password i n the pop-up box.Please lose the default user name when logging in for the first time admin, Password admin

Enter the router Web Settings page
After Enter, Go to Web Set UI,then you can set and manage the modem.

Working Mode

CPE supplies 4 working mode: 4G wireless mode, Default, Standard wireless modem mode, Wireless AP+Wireless client bridge mode, Wireless AP+Wireless client mode.

1.4G Wireless Modem Mode.
CPE Set 4G Wireless modem mode as default, Insert 4G SIM card, the modem will identify 4G automatically. You can also define the network operators you need to choose.

Standard modem mode

1) Static online mode
Enter the router management interface work mode to select the standard routing mode,WAN
Set the static address on the Internet,Enter the IP address, network mask, gateway, DNS and other related parameters provided by the ISP,then confirm.

2) Dynamic Internet access
Enter the router management interface work mode to select the standard routing mode WAN Set up the online mode to select the dynamic address, choose confirm, The router will automatically get the parameters assigned by the ISP.

3) PPPoE online modem
Enter the router management interface work mode to select the standard routing mode WAN Set up the online option .
PPPoE,Enter the user name, password and other relevant parameters provided by the IS P, Choose Confirm.

Wireless AP+Wireless client bridge mode

After we choose this mode, we can use CPE as Bridge AP,Used for bridging the front level wireless router. SET 192.168.0.100 as IP Address first, then connect LAN2 Port by cable, get into router manage UI, choose ireless AP+Wireless client bridge mode.

1. Click on LAN Settings to search for wireless network,
   

2. You can see the valid wireless AP name in the current range and select the corresp onding wireless AP.
   

3. Enter the selected wireless AP password, and you can bridge the first level wireless AP.
   

Wireless AP+Wireless client mode

• Router management interface — working mode — wireless AP+ client mode, click confirm.
• Wireless-Connection–Choose ApClinet from the drop-down menu-Dynamic addr ess (automatically obtained from DHCP server),Click on the search wireless net work.The selection dialog box will automatically pop up all the wireless networks that are searched,Select the WIFI network you want to connect to, and check the Channel of the selected network, which is the Channel, and click connect.If the s elected WIFI has a password, please enter the corresponding password in the wi reless security below, and pay attention to whether the password is character typ e or hexadecimal.Click ok.
• Router management interface–
  Wireless-Setting–
  The corresponding Chan is selected in the wireless channel.

Wireless security Settings

1. ireless security
   There are several types of wireless security modes, and different security modes can be selected as needed.
   · Block up
   · Open System
   · WPA-PSK
   · WPA2-PSK
   · WPAPSKWPA2PSK (WPA-PSK and WPA2-PSK mode)

2. Open System
   The encryption type in this security mode is.
   : None and WEP
   Description UI:

UI

|

Description

---|---
Encryption type| There are two types of encryption available: None and WEP.Select None to be unencrypted, and choose WEP to encrypt the Settings interface. As shown.
WEP Encryption le ngth| There are two encryption lengths available: 64bit and 128 bit.The default value is 64bit.
The default k ey ID| You can set four keys at the same time, but only one key can be used in the present. This is the key you want to use today. The default value is key 1.
WEP key| You can choose to set the key type and set the key.Ther e are two key types available: hexadecimal and character.Set different keys according to different encryption lengt hs and key types.

Key Setting:
64bit encryption:      Ten hexadecimal or 5-digit characters.
128bit encryption:    26 digit hexadecimal or 13-digit characters.

3. WPA-PSK
   This security mode is the wpa-psk encryption mode.
   
   UI Interface Description:UI| Description
   ---|---
   Safe mode| WPA-PSK。
   Encryption type| TKI or AES
   WPA-PSK Key| Set the key, the legal key length is: 8-63 ASCII character s or 64 hexadecimal digits (0~9, a~f or a~f).
   Key update interval| Set the key update time interval in seconds.
4. WPA2-PSK
   

CPE-CPE

5. WPAPSKWPA2PSK
   

Equipment management

Equipment function

UPnP protocol is used by Windows ME, 2000,XP,Win7 and other systems.If enabled, the se operating systems will automatically find the router through the protocol.
UPnP (Universal Plug and Play), It is mainly used to realize intelligent interconnection of equipment, without user p articipation and use of master server, which can automatically detect and control various network devices from various manufacturers.
With UPnP capability, the router can achieve NAT crossing: when the computer in the LA N passes.
Wireless router to the Internet communication, a wireless router can add, delete, NAT.

Check the single box, press < confirm > button, set the completion.

Software Upgrade

With software upgrades, you can load the latest version of the software to the router for more functionality and more stable performance.

Steps to upgrade

(1) Save the router upgrade file to the local computer.
(2) Click on the > button to select the software that needs to be upgraded.
(3) Click the upgrade > button to start the upgrade.

Ex-factory value

• The wireless router will be restarted during setup.
  The restore to factory Settings will clear all Settings for the wireless router and revert to t he initial state.This function is commonly used in equipment from one to another network environment of different network environment, the restoration of equipment to factory Sett ings, and then to reset, in order to more suitable for the current network.
  Click < restore factory value > button, confirm and restore factory Settings.

Password management

The default user name/password of the wireless router is admin, the user name is not mo dified, and the password can be modified.To be on the safe side, it is recommended to c hange the password and keep the password information.
Setup steps are as follows:
(1) enter the original password in the > text box of the original password;Enter a new pas sword in the new password > text box and reenter the new password in the confirm pass word > text box to confirm.
(2) click “confirm > button to complete the password modification.”

STATEMENT

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Has not approved any changes or modifications to this device by the user. Any changes or modifications could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. The antenna should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>