SLV 1004700 Wall and Ceiling Light Instruction Manual
- May 15, 2024
- SLV
Table of Contents
SLV 1004700 Wall and Ceiling Light
Other Models
Dimension
1004700| 220V-240V ~50/60Hz| 8,5W| 470 lm| 4000K| CRI>90| Ø 11,5 x 3,5 cm|
0,23 kg
---|---|---|---|---|---|---|---
1004701| 13W| 990 lm| Ø 16,5 x 3,5 cm| 0,34 kg
1004702| 16W| 1300 lm| Ø 21,5 x 3,5 cm| 0,47 kg
1004703| 8,5W| 440 lm| 11,5 x 11,5 x 3,5 cm| 0,27 kg
1004704| 13W| 880 lm| 16,5 x 16,5 x 3,5 cm| 0,39 kg
1004705| 16W| 1240 lm| 21,5 x 21,5 x 3,5 cm| 0,50 kg
Part
Feature
Installation Instruction
INSTRUCTION MANUAL PART A Wall- and Ceiling Light
1004700 …01 …02…03 …04 …05
-
SLV 1004700 …03
-
SLV 1004701 …02 …04 …05
The installation requires expert knowledge and may be carried out only by an approved electrician under consideration of local and national regulations!
Safety Precaution
The light source is only exchangeable by a professional. The separate control unit is only exchangeable by a professional.
SLV UK Unit E Chiltern Park
Boscombe Road, Bedfordshire LU5 4LT
Operating Manual PART B
Wall- and Ceiling Light
1004700 …01 …02 …03 …04 …05
Read manual carefully and keep for further use!
Safety advices for installation and operation.
Disregard may lead to danger of life, burning or fire!
Any works on the electrical connection only by electrician.
Do not alter or modify the product.
Do not fasten anything on the product.
Do not cover the product.
Take out of service when suspecting a defect or malfunction and contact your
dealer or a qualified electrician.
Take measures that children get not harmed by the product.
Do not stare into the active light source.
Additional safety advices =
Use as directed
Safety class I (1) – Connection with protective conductor.
Operate only firmly fixed on an even surface.
Operate only on normal or not inflammable surfaces.
Operate only in dry indoor area.
Do not strain mechanically or expose to strong dirt contamination.
Light Source
The light source of this luminaire may only be replaced by the manufacturer, an authorized service technician or a comparable qualified person.
This product contains a light source of the energy efficiency class E.
Care / Storage
Disconnect product from mains and let it cool down. Clean external surfaces regularly with a slightly moistened (water) cloth. Store dry and clean.
Installation
Switch off mains / fixed connection cable!
Use only described accessories.
Use only suitable fastening materials.
Only suited for wall and ceiling surface mounting.
Install as shown in the figure.
Suitable Dimmer: Leading-edge phase dimmer (Code L) / Trailing-edge phase
dimmer (Code C). Note manufacturers instructions.
Electrical connection
Equip flexible wire ends with suitable wire ferrules!
Live conductor → Terminal L
Neutral conductor → Terminal N
Protective conductor → Earth terminal
Check secure fixation and proper function!
© 0001 25.08.2023 SLV GmbH, Daimlerstr. 21-23, 52531 Übach-Palenberg, Germany, Tel. +49 (0)2451 4833-0. Made in China.