SLV 1000823 MOLAT Ceiling Light Instruction Manual
- May 15, 2024
- SLV
Table of Contents
SLV 1000823 MOLAT Ceiling Light Instruction Manual
The installation requires
expert knowledge and may be carried out only by an approved electrician under
consideration of local and national regulations!
Operating Manual PART B Ceiling Light
Read manual carefully and keep for further use!
Safety advices for installation and operation. Disregard may lead to danger
of life, burning or fire!
Any works on the electrical connection only by electrician.
Do not alter or modify the product.
Do not fasten anything on the product.
Do not cover the product.
Operate only with intact protection glass.
Take out of service when suspecting a defect or malfunction and contact your
dealer or a qualified electrician.
Take measures that children get not harmed by the product.
Additional safety advices = ****
Use as directed
Safety class I (1) – Connection with protective conductor.
Operate only firmly fixed on an even surface.
Operate only on normal or not inflammable surfaces.
Do not strain mechanically or expose to strong dirt contamination.
IP44: Protection against foreign objects > Ø 1,0mm – Protection against
splashing water from all directions.
Lamp replacement
**** Disconnect luminaire from mains and let it cool down. Suitable light
sources: E27, 60W max. Clean gasket when dirty.
Care / Storage
**** Disconnect product from mains and let it cool down. Clean external
surfaces regularly with a slightly moistened (water) cloth. Do not clean with
pressure washer.
Openings providing aeration or drainage must be kept free.
The following influences may have unwanted effects on the product: acidic
surrounding, high salt content in the air, cleaning agents, fertilizer,
thawing salt, chemicals.
Store dry and clean.
Installation
**** Switch off mains / fixed connection cable! Use only described accessories. Use only suitable fastening materials. Only suited for ceiling surface mounting.
**** Follow local regulations for outdoor installations. Do not seal the
product yourself (e.g. with silicone). Install according to declared IP type.
Install as shown in the figure.
Electrical connection
Direct the fixed wiring with its complete insulation at least 15 mm into the
housing.
Equip flexible wire ends with suitable wire ferrules!
Live conductor :Terminal L
Neutral conductor :Terminal N
Protective conductor :Earth terminal
**** Check secure fixation and proper function!
SLY UK UK Unit E Chittam Park CA Boscombe Road, Badfontanire LUS ALT