SLV 48VDC Luminaire 48V Track System LED Pendant Lamp Instruction Manual
- May 15, 2024
- SLV
Table of Contents
SLV 48VDC Luminaire 48V Track System LED Pendant Lamp
Product Specifications
- Brand: Numinous
- Model : XS Pendant 48V
- Power Supply: 48 VDC
- Power Consumption: 8.7 W
- CRI (Color Rendering Index): >90
- Weight: 0.21 kg
Product Usage Instructions
Safety Advice
Read the manual carefully and keep it for future reference. Disregarding safety bits of advice may lead to danger. Do not alter or modify the product, fasten anything on it, or cover it. If you suspect a defect or malfunction, contact your dealer or a qualified electrician. Ensure children are not harmed by the product and avoid staring into the active light source.
Additional Safety Advice
Use the product as directed and only with the corresponding track system. It at Safety Class III (3) with safety extra-low voltage operations. Operate only in dry indoor areas, avoid mechanical strain, and exposure to dirt contamination.
Light Source Replacement
The light source of this luminaire should be replaced by the manufacturer, an authorized service technician, or a qualified person. Refer to the attached data sheet for energy efficiency class information.
Care and Storage
Disconnect the product from the mains before cleaning and let it cool down. Clean external surfaces regularly with a slightly moistened cloth. Store the product in a dry and clean place.
Installation
Disconnect the system from the power supply and use only the described accessories. Insert the adapter into the track without using force. Pay attention to the mechanical load of the tracks when attaching luminaires. Turn the knob to ON after insertion.
Adapting the Pendant
(To be done only by an electrician) Open the adapter, loosen the strain relief (A), carefully remove the board, loosen the wire from the clamp (B), adapt the cable, tin-coat and reconnect wire ends, insert the board, secure the strain relief, and close the adapter. Perform a continuity test after shortening the pendant cable. Check for secure fixation and proper function.
FAQ
- Q: Can I use this product outdoors?
- A : No, this product is designed for dry indoor areas only.
- Q: How should I clean the product?
- A: Clean external surfaces regularly with a slightly moistened cloth. Do not use harsh chemicals.
Installation Instructions
INSTRUCTION MANUAL PART A Luminaire for SLV 48V Track System
Power off
The light source is only exchangeable by a professional. The separate control unit is only exchangeable by a professional.
Operating Manual PART B
Luminaire for SLV 48V Track System NUMINOS XS Pendant 48V
Read the manual carefully and keep it for further use!
- Safety bits of advice for installation and operation.
- Disregarding may lead to danger of life, burning or fire!
- Do not alter or modify the product.
- Do not fasten anything on the product.
- Do not cover the product.
- Take out of service when suspecting a defect or malfunction and contact your dealer or a qualified electrician.
- Take measures that children are not harmed by the product.
- Do not stare into the active light source.
- Additional safety advice =
Use as directed
- Use only with the corresponding track system.
- Safety class III (3) – Operated with safety extra-low voltage.
- Operate only in dry indoor areas.
- Do not strain mechanically or expose to strong dirt contamination.
Light Source
The light source of this luminaire may only be replaced by the manufacturer,
an authorized service technician or a comparable qualified person.
This product contains a light source of the energy efficiency class: see the
attached data sheet.
Care / Storage
- Disconnect the product from the mains and let it cool down.
- Clean external surfaces regularly with a slightly moistened (water) cloth.
- Store dry and clean.
Installation
- Disconnect the complete system from the power supply.
- Use only described accessories.
- Do not use force when inserting the adapter.
- When attaching luminaires pay attention to the admissible mechanical load of the tracks.
- Insert the adapter into the track.
- Turn the knob to “ON”.
Adapting the pendant (only by electrician)
Open the adapter. Loosen the strain relief(A). Take out the board carefully.
Loosen the wire from the clamp(B) carefully. Adapt the cable, prepare, tin-
coat and reconnect the wire ends. Insert the board. Secure the strain relief.
Close the adapter. Carry out a continuity test after shortening pendant cable.
Check secure fixation and proper function
NUMINOS XS Pendant 48V
CONTACT
© 05.12.2022 SLV GmbH, Daimlerstr. 21-23, 52531 Übach-Palenberg, Germany, Tel. +49 (0)2451 4833-0. Made in China.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>