SLV 113140 Recess Mounted Ceiling Light Instruction Manual
- May 15, 2024
- SLV
Table of Contents
SLV 113140 Recess Mounted Ceiling Light Instruction Manual
Operating Manual PART B Recess-Mounted Ceiling Light 113140 …41
Read manual carefully and keep for further use!
⚠ Safety advices for installation and operation.
Disregard may lead to danger of life, burning or fire!
Any works on the electrical connection only by electrician.
Do not alter or modify the product.
Do not fasten anything on the product.
Do not cover the product.
Take out of service when suspecting a defect or malfunction and contact your
dealer or a qualified electrician.
Take measures that children get not harmed by the product.
Additional safety advices = ⚠
Use as directed
Safety class II (2) – Safety insulated – Connection without protective
conductor.
Operate only firmly fixed on an even surface.
Operate only on normal or not inflammable surfaces.
Operate only in dry indoor area.
Do not strain mechanically or expose to strong dirt contamination.
Lamp replacement
⚠ Disconnect luminaire from mains and let it cool down.
Suitable light sources: GU10, 25W max.
Care / Storage
⚠ Disconnect product from mains and let it cool down.
Clean external surfaces regularly with a slightly moistened (water) cloth.
Store dry and clean.
Installation
⚠ Switch off mains / fixed connection cable!
Use only described accessories.
Only suited for recessed ceiling installation.
Keep sufficient distance to inflammable materials.
Ensure sufficient aeration.
: Do not cover, especially not with insulating materials.
Install as shown in the figure.
Electrical connection
Equip flexible wire ends with suitable wire ferrules!
Direct the fixed installation cable through strain relief.
Live conductor → Terminal L
Neutral conductor → Terminal N
Connection lead with protective conductor: The green-yellow wire (protective
conductor) of the connection lead has to be tightly connected with clamp E of
the product.
Secure strain relief.
Ensure that the fixed installation cable is securely kept by the strain
relief.
When connecting several luminaires the total current of 16A may not be
exceeded.
⚠ Check secure fixation and proper function!
© 06.02.2023 SLV GmbH, Daimlerstr. 21-23, 52531 Übach-Palenberg, Germany, Tel. +49 (0)2451 4833-0. Made in China.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>