SLV 1001309 Q-LINE Pendant Light User Manual
- May 15, 2024
- SLV
Table of Contents
INSTRUC TION MANU AL PART A
Pendant Light
1001309
1001310
1001309 Q-LINE Pendant Light
The inst allat i on requires expert knowledg e and may be carried out only by an approved electrician under considerat ion of local and national regulat ions!
The light source is only exchangeable by a prof essional. The separate control unit is only exchangeable by a prof essional.
SLV UK
Unit E Chiltern Park
Boscombe Road, Bedfordshire
LU5 4LT
Disposal (European Union)
**** Do not dispose the product with the regular household waste! Products
marked with this sign must be disposed according to the directive (WEEE) on
electrical and electronic devices at local collection points for such devices!
Waste batteries and accumulators, which are not enclosed by the waste
equipment, and lamps, which are removable non-destructively from the waste
equipment are to be separated non-destructively from the waste equipment
before tuming to a local collection point.
Distributors are, according to particular legislation, obligated to take back
waste equipment from the final holder.
It lies in the personal responsibility of the final holder to delete personal
data before the disposal.
For disposal the waste equipment may be send to the following address:
Operating Manual PART B
Pendant Light
1001309, 1001310
Read manual carefully and keep for further use!
Safety advices for installation and operation.
Disregard may lead to danger of life, burning or fire!
Any works on the electrical connection only by electrician.
Do not alter or modify the product.
Do not fasten anything on the product.
Do not cover the product.
Take out of service when suspecting a defect or malfunction and contact your
dealer or a qualified electrician.
Take measures that children get not harmed by the product.
Do not stare into the active light source.
Additional safety advices =
Use as directed
Safety class|(1) **– Connection with protective conductor.
Operate only firmly fixed on an even surface.
Operate only on normal or not inflammable surfaces.
Operate only in dry indoor area.
Do not strain mechanically or expose to strong dirt contamination.
Light Source**
The light source of this luminaire may only be replaced by the manufacturer,
an authorized service technician or a comparable qualified person.
This product contains light sources of the energy efficiency class E.
Care / Storage
Disconnect product from mains and let it cool down.
Clean extemal surfaces regularly with a slightly moistened (water) cloth.
Store dry and clean.
Installation
Switch off mains / fixed connection cable!
Use only described accessories.
Use only suitable fastening materials.
Only suited for ceiling surface mounting.
Install as shown in the figure.
Adjust pendant length of the wires with the wire fixer. If necessary shorten
the pendant cable: Loosen strain relief(A). Disconnect wires and cut the
pendant cable. Connect as before (attach wire end ferrules if necessary!).
Secure strain relief. The pendant cable may not be strained. Carry out a
continuity test after shortening pendant cable.
Suitable Dimmer: DALI dimmer / light control. Note manufacturer’s
instructions.
Electrical connection
Equip wires of the fixed wiring with protective tubes.
Equip flexible wire ends with suitable wire ferrules!
Live conductor > Terminal L
Neutral conductor > Terminal N
Protective conductor > Earth terminal
Dali control wires => Terminals DALI N + DALIL
Check secure fixation and proper function!
© 23.05.2023 SLV GmbH, Daimlerstr. 21-23, 5 2531 Übach-Palen berg, Germany,
Tel. +49 (0)2 451 4833-0.
Made in China.