HANECO V3P Floodlight Finesse Instruction Manual
- September 17, 2024
- HANECO
Table of Contents
HANECO V3P Floodlight Finesse
Specifications
Model| Power| Dimensions (mm)| Weight (kg)| Package Size (mm)| Package Weight
(kg)
---|---|---|---|---|---
Simplitz Floodlight V3 Premium Edition 150W| 150W| 469 x 317 x 65| 13| 100 x
140 x 170| 0.11
Simplitz Floodlight V3 Premium Edition 200W| 200W| 529 x 369 x 65| 13| 100 x
160 x 190| 0.14
Simplitz Floodlight V3 Premium Edition 240W| 240W| 529 x 369 x 65| 13| 100 x
160 x 190| 0.14
Simplitz Floodlight V3 Premium Edition 300W| 300W| 611 x 399 x 79| 13| 100 x
210 x 240| 0.18
Product Usage Instructions
Installation Guidelines
- Installation and maintenance should be done by a qualified electrician following IEE electrical regulations.
- The product is suitable for both indoor and outdoor use.
- Ensure the power supply is off before starting installation or maintenance.
- The power supply system should have Surge Protection Device (SPD) as per electrical regulations.
- Connect L to the phase line and N to the neutral line. Ensure correct grounding.
Safety Instructions
- The luminaire should be grounded properly.
- If the external cable is damaged, it should be replaced by a qualified person to avoid hazards.
- Avoid looking directly at the luminaire within 7.9 meters.
- Avoid touching the luminaire when it is on.
Maintenance and Service
If maintenance is required, contact the manufacturer or authorized service
agents for replacements or repairs.
FAQ
Q: Is a power cable provided with the product?
A: No, the power cable is not provided. You will need to use an appropriate
power cable meeting the specifications provided.
Installation Manual
- Please read instruction carefully before assembling and installation
- Please keep instruction as reference in the future
Premium Edition
Installation
Bracket fixation
Fasten safety cable
Stainless safety chain ®≥4mm (to be ordered separately)
Lamp must fasten individual safety cable.
Safety cable must be fastened tightly on the installation surface.
Adjustable projection angle
Premium Edition
Connection
Connection
Premium Edition
WARNING
- Ensure that any installation and maintenance be performed by a qualified electrician and the luminaire is wired in accordance with the latest lEE electrical regulations or the local equipment.
- The products are suitable for indoor and outdoor use
- Ensure that the power supply is off before starting installation and maintenance. Do not switch on until the installation or maintenance is completed.
- Power supply system should be equipped with SPD (Surge protection Device) accordance with electrical regulations
- Connect L to the phase line and N to the neutral line. Do not connect PE access ground cables incorrectly.
- Make sure the products are grounded.
- If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualifed person in order to avoid a hazard.
- Ine liant source contained In tnis luminalre shall only de replaced oy te manufacturer or. hisservice agent or a similar qualifed person_
- For luminaire with dimming function, basic insulation is complied between control conductors and LV supply.
- The luminaire should be positioned so that prolonger staring into the luminaire at a distance closer than 7.9 m is not connected
- Shall not touch while the luminaires is lighting on.
Traxon Technologies Europe GmbH
Karl-Schurz-Str. 38, 33100 Paderborn, Germany
Traxon Lighting Company Limited B402-B421, Building 6, Northwest Shenjiu
Science and Technology Pioneer Park, the intersection of Taohua Road and
Binglang Road, Fubao Community, Fubao Street, Futian Disctirct, Shenzhen
Service Contact
HANECO Haneco Lighting Australia Pty Ltd 262 Marion Road, Netley, South
Australia 5037 Haneco.com.au OSRAM is a trademark of
OSRAM GmbH. Traxon e:cue is a licensee of OSRAM brand for fixed list of
General Lighting products. Haneco Lighting Australia is the exclusive
distributor in Australia, New Zealand and Pacific Islands