OPT7 08-23 Lighting DRT Halo RGB Dodge Challenger Installation Guide
- June 1, 2024
- OPT7
Table of Contents
OPT7 08-23 Lighting DRT Halo RGB Dodge Challenger
COMPONENTS
INSTALLATION
EXAMPLE
WARNING
- Connecting to more than 10 AMP will override the kit and cause early failure, ensure it is 10 AMP or less!!
- Please ensure that the LED bars or strips/control box/wiring all are mounted in areas where will not exceed 85℃ or 185℉.
IMPORTANT
BE SURE TO CONFIRM THE CORRECT DIRECTION OF THE ARROW!!
TO AVOID PRODUCT DAMAGE DUE TO INCORRECT INSTALLATION.
BUTTON LAYOUT
STEP 4 Using the included E-Z Remote, select your desired color or pattern.
- Power-ON
- Automatic Color Change
- Power-OFF
- Speed +/- 8 Levels
- Mode +/- 19 Mode
- Dimmer 8 Levels
- Color Selection 12 Colors
DISCLAIMER
OPT7 Lighting is not liable for damages or personal injuries while installing
this product. The Installation Guide is intended as assistance to reduce setup
time.
OPT7 Lighting assumes no responsibility for improper installation.
If you are unfamiliar with your vehicle or inexperienced with aftermarket
upgrades, please seek professional assistance.
OPT7 recommends installation for safety and guidance.
Modified installations or installation recommendations not specified by OPT7
Lighting will void product warranty.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>