OPT7 RGB DRL HALO Aura DRL Halo Light Kit Installation Guide

OPT7 RGB DRL HALO Aura DRL Halo Light Kit

Product Information

Specifications

• Product Name: DRL HALO RGB
• Compatible Vehicle: DODGE CHALLENGER 2008-2022
• Components included: Light Strips, Aura Control Box, Remote, Mounting Kit, Hardwire Power Harness, Extension Wires

Product Usage Instructions

Installation

1. STEP 1: Open the hood
2. STEP 2: Run the wires along the front brace and connect to the control box
3. STEP 3 : Connect the power wire harness to your vehicle battery
4. STEP 4 : Using the included E-Z Remote, select your desired color or pattern
5. STEP 5: Wrap the LED strip into a circle shape and firmly press into place inside of the intake hole to secure. Alternatively, attach the strip as pictured for an alternate method of install.
6. STEP 6 : Remove the plastic covers on the right and left side of the engine bay. Test for function.

Installation Example

WARNING:

1. Connecting to more than 10 AMP will override the kit and cause early failure, ensure it is 10 AMP or less!!
2. Please ensure that the LED bars or strips/control box/wiring are mounted in areas where the temperature will not exceed 85°C or 185°F

IMPORTANT:
BE SURE TO CONFIRM THE CORRECT DIRECTION OF THE ARROW!! TO AVOID PRODUCT DAMAGE DUE TO INCORRECT INSTALLATION.

Button Layout

1. Power-ON
2. Automatic Color Change
3. Power-OFF
4. Speed +/- 8 Levels
5. Mode +/- 19 Mode
6. Dimmer 8 Levels
7. Color Selection 12 Colors

Disclaimer

• OPT7 Lighting is not liable for damages or personal injuries while installing this product. The Installation Guide is intended as assistance to reduce setup time. OPT7 Lighting assumes no responsibility for improper installation. If you are unfamiliar with your vehicle or inexperienced with aftermarket upgrades, please seek professional assistance.
• OPT7 recommends installation for safety and guidance. Modified installations or installation recommendations not specified by OPT7 Lighting will void product warranty.

FAQ

1. Q: Can I install this product on a vehicle other than the Dodge Challenger?
   A: This product is specifically designed for the Dodge Challenger 2008-2022 model and may not be compatible with other vehicles.

2. Q: What happens if I connect the product to a power source exceeding 10 AMP?
   A: Connecting to more than 10 AMP will override the kit and may cause early failure. Ensure that the power source does not exceed this limit to prevent damage to the product.

3. Q: How do I change colors or patterns using the E-Z Remote?
   A: Use the included E-Z Remote to select your desired color or pattern by following the button layout provided in the instructions.

DRL HALO RGB DODGE CHALLENGER 08-22 INSTALLATION GUIDE

COMPONENTS

INSTALLATION

1. Open the hood.

2. Wrap the LED strip into a circle shape and firmly  press into place inside of the intake hole to secure. AND/OR
   Attach the strip as pictured as an alternate method of install.

3. Remove the plastic covers on the right and left side of the engine bay.

4. Run the wires along the front brace and connect to the control box.

5. Connect the power wire harness to your vehicle battery.

6. Test for function.

EXAMPLE

WARNING

1. Connecting to more than 10 AMP will override the kit and cause early failure, ensure it is 10 AMP or less!!
2. Please ensure that the LED bars or strips/control box/wiring all are mounted in areas where will not exceed 85℃ or 185℉.

IMPORTANT!
BE SURE TO CONFIRM THE CORRECT DIRECTION OF THE ARROW!! TO AVOID PRODUCT DAMAGE DUE TO INCORRECT INSTALLATION.

STEP 4
Using the included E-Z Remote, select your desired color or pattern.

1. Power-ON
2. Automatic Color Change
3. Power-OFF
4. Speed +/- 8
5. Levels Mode +/- 19 Mode
6. Dimmer 8 Levels
7. Color Selection 12 Colors

DISCLAIMER

• OPT7 Lighting is not liable for damages or personal injuries while installing this product. The Installation Guide is intended as assistance to reduce setup time. OPT7 Lighting assumes no responsibility for improper installation.
• If you are unfamiliar with your vehicle or inexperienced with aftermarket upgrades, please seek professional assistance.
  • OPT7 recommends installation for safety and guidance.
  • Modified installations or installation recommendations not specified by OPT7 Lighting will void product warranty.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>