OPT7 Sidekick Running Board With Warning Light Instruction Manual
- June 1, 2024
- OPT7
Table of Contents
OPT7 Sidekick Running Board With Warning Light Instruction Manual
Content
-
RIGID LED LIGHT BAR
-
KEYCHAIN REMOTE
-
CONTROL BOX
-
SCOTCHLOKS
-
BRACKETS
-
ADHESIVE BOOSTER
-
ZIP-TIES
INSTALLATION
STEP 1 Open the package, and verify all the includes parts are received prior installation.
NOTE Please ensure to perform a bench test on light bar through the control box before installing it on your vehicle.
STEP 2 light bar. (A dirty surface will prevent the LED bar from attaching firmly and securely.)
STEP 3 Wipe the mounting area with the included adhesive booster.
STEP 4 Measure the area you wish to mount the LED Bar, once selected, firmly press the LED light bar to the mounting area and hold for 3-5 seconds.
OPTIONAL Use the provided brackets to strengthen the hold with screws.
STEP 5 Next, find your vehicle’s corresponding wiring as shown below to
power the unit
IMPORTANT
BE SURE TO CONFIRM THE CORRECT DIRECTION OF THE ARROW!! TO AVOID PRODUCT
DAMAGE DUE TO INCORRECT INSTALLATION.
STEP 6 Use included zip-ties to tuck away excess wiring.
STEP 7 Once all wiring is installed, please test the LED light bar again
for function
HOW TO USE
THE WARNING LIGHT FUNCTION
Press the “A” button to enable the warning light function. You may easily switch between modes using the B,C,D on the RF remote
A Power ON/OFF
B Adjust Speed (H/M/L)
C Mode Up (5 Level)
D Mode Down (5 Level)
NOTES
- Swipe the id down to use the 4 key button to control the lights.
- Ensure to use this product within 10M/33FT or more When the
- Warning Lights are activated, the vehicle’s signal receptions will be temporarily disabled and will only restore once turned off.
DISCLAIMER
OPT7 Lighting is not liable for damages or personal injuries while installing this product. The Installation Guide is intended as assistance to reduce setup time. OPT7 Lighting assumes no responsibility for improper installation. If you are unfamiliar with your vehicle or inexperienced with aftermarket upgrades, please seek professional assistance.
OPT7 recommends installation for safety and guidance, Modified installations or installation recommendations not specified by OPT7 Lighting will void product warranty.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>