STAIRVILLE 523764 Vintage Bowl 30 RGBA IR LED Light User Guide
- June 12, 2024
- STAIRVILLE
Table of Contents
STAIRVILLE 523764 Vintage Bowl 30 RGBA IR LED Light
Product Information
Vintage Bowl 30 RGBA IR –
This device is a vintage bowl with RGBA (Red, Green, Blue, Amber) LED technology. It is designed for professional use as an electronic lighting effect. The product is not suitable for household use. Improper use or use under other operating conditions may result in personal injury or property damage. Please read the safety instructions carefully before using the product.
Product Safety Instructions
- Ensure that plastic bags, packaging, etc. are disposed of properly and are not within reach of babies and young children to prevent choking hazards.
- Children should not detach any small parts from the product to avoid swallowing and choking risks. Never let children useelectrical devices unsupervised.
- Do not block areas of ventilation and keep the device away from naked flames to prevent the risk of fire.
- When mounting the device onto a stand, ensure that the stand is safe, stable, and can handle the weight of the device without exceeding its maximum load capacity.
- Do not remove any covers as there may be high voltages inside the device. The device has no user-serviceable parts. Do not use the device if covers, protectors, or optical components are missing or damaged.
- Do not modify the mains cable or plug. Seek advice from a registered electrician if in doubt to prevent electric shock, death, or fire.
- Ensure that the installation complies with the standards and rules in your country. Always secure the device with a secondarysafety attachment, such as a safety cable or safety chain, to prevent injury caused by falling objects.
- Avoid looking directly into the light source to prevent eye damage caused by high light intensity.
- Strobe lighting can trigger seizures in photosensitive epilepsy. Sensitive individuals should avoid looking at strob elights.
- Extend the operating life of the device by taking regular breaks and avoiding frequent switching on and off. The device is not suitable for continuous operation. Provide adequate ventilation and operate the LEDs with the lowest possible brightness to extend the service life of the illuminants.
Product Usage Instructions
To operate the Vintage Bowl 30 RGBA IR, follow these steps:
- Switch on the device by pressing the [ON] button.
- Select the basic color green by pressing the [G] button.
- Select the basic color blue by pressing the [B] button.
- Select the basic color amber by pressing the [W] button.
- Use the additional buttons for different lighting effects:
- [FLASH] for a flashing effect
- [STROBE] for a strobe effect
- [FADE] for a fading effect
- [SMOOTH] for a smooth effect
Please refer to the product manual for more detailed instructions on advanced features and settings.
Quick start guide
This quick start guide contains important information on the safe operation of
the product. Read and follow the safety advice and instructions given. Retain
the quick start guide for future reference. If you pass the product on to
others please include this quick start guide.
Safety instructions
Intended use
This device is intended for use as an electronic lighting eff ect by means of
LED technology. The device is designed for professional use and is not
suitable for use in households. Any other use or use under other operating
conditions is considered tobe improper and may result in personal injury or
property damage. No liability will be assumed for damages resulting from
improper use.
-
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not within reach of babies and young children. Choking hazard! Ensure that children do not detach any small parts from the product. They could swallow the pieces and choke! Never let children unattended use electri-cal devices. -
Electric shock caused by high voltages inside
Within the device there are areas where high voltages may be present. Never remove any covers. There are no user-serviceable parts inside. Do not use the device if covers, protectors or optical components are missing or damaged. -
Electric shock caused by short-circuit
Do not modify the mains cable or the plug. Failure to do so could result in electric shock/death or fi re. If in doubt, seek advice from a registered electrician. -
Risk of injury caused by falling objects
Make sure that the installation complies with the standards and rules that apply in your country. Always secure the device with a secondary safety attachment, such as a safety cable or a safety chain. -
Eye damage caused by high light intensity
Never look directly into the light source. -
Risk of epileptic shock
Strobe lighting can trigger seizures in photosensitive epilepsy. Sensitive persons should avoid looking at strobe lights. -
Risk of overheating
The distance between light output and the illuminated surface must be more than 1.5 m (19.7 in). Provide sufficient ventilation. The ambient tem-perature must always be below 40 °C (104 °F). -
Risk of fire
Do not block areas of ventilation. Do not install the device near any direct heat source. Keep the device away from naked flames. -
Use of stands
When mounting the device onto a stand, ensure that the stand is in a safe and stable position and that the weight of the device does not exceed the maximum permissible load capacity of the stand. -
Operating life of the LEDs
Extend the operating life of the device by regular breaks and by avoiding frequent switching on and off . The device is not suitable for continuous operation.
For technological reasons, the light output of LEDs decreases over their lifetime. This eff ect increases with higher operating temperature. You can extend the service life of the illuminants by providing adequate ventila-tion and operating the LEDs with the lowest possible brightness.
Where to use the product
Never use the product
- outdoors
- in direct sunlight
- in conditions of extreme temperature or humidity
- in extremely dusty or dirty areas
- at locations where the unit can become wet
General handling
- To prevent damage, never use force when handling the product.
- Never immerse the product in water. Just wipe it with a clean dry cloth. Do not use liquid cleaners such as benzene, thinners or fl ammable cleaning agents.
Features
- Decorative element for stages and bars
- 40-W LED, 4in1, RGBA
- Sturdy metal construction
- Illuminated refl ector with a unique look
- Automatic colour change and fade programmes
- Static colours selectable
- Fixed power cable
- Control via IR remote control (supplied)
Installation
You can install the device in hanging or standing position.
- The safety rope must be attached to the safety rope eyelet on the back of the device.
- When in use, the device must always be attached to a solid surface or an approved truss. Use the openings provided on the double bracket for attaching.
- Always work from a stable platform whenever installing, moving or servicing the unit. In doing so, the area underneath the unit must be cordoned off .
- Please note that this device must not be connected to a dimmer.
IR remote control
-
Buttons for increasing or decreasing the brightness
-
[ON] Switch on the device
-
[G] Selection of the basic colour green
-
[B] Selection of the basic colour blue
-
[W] Selection of the basic colour amber
-
[FLASH] 4 buttons to select a preset colour change
[STROBE] [FADE] [SMOOTH] -
12 buttons to select a colour preset
-
[R] Selection of the basic colour red
-
[OFF] Switch off the device
Technical specifications
- Light source 40-W LED, 4in1, RGBA
- Control IR remote control (supplied)
- Control via DMX no
- Power consumption 34 W
- Power supply fixed power cable
- 100 – 240 V ~ 50/60 Hz
- Battery remote control 2× AAA
- Degree of protection IP20
- Mounting options Hanging, standing
- Diameter 300 mm
- Dimensions (W × H × D) 310 mm × 430 mm × 200 mm (with bracket)
- Weight 2.9 kg
- Ambient conditions Temperature range 0 °C…40 °C
- Relative humidity 20 %…80% (non-condensing)
For the transport and protective packaging, environmentally friendly
materialshave been chosen that can be supplied to normal recycling. Ensure
that plastic bags, packaging, etc. are properly disposed of. Do not just
dispose of these materials with your normal household waste, but make sure
that they are collected for recycling. Please follow the notes and markings on
the packaging.
Batteries must not be disposed of as domestic waste or thrown into fire.
Dispose of batteries according to national or local regulations regarding
hazardous waste. Dispose of empty batteries at appropriate collection sites.
This product is subject to the European Waste Electrical and Electronic
Equipment Directive (WEEE) in its currently valid version. Do not dispose of
your old device with your normal household waste. Dispose of this product
through an approved waste disposal firm or through your local waste facility.
Comply with the rules and regulations that apply in your country. If in doubt,
consult your local waste disposal facility.
Thomann GmbH • Hans-Thomann-Straße 1 • 96138 Burgebrach • www.thomann.de • info@thomann.de
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>