OPT7 Aura Aluminum Underglow LED Lighting Kit User Manual
- May 15, 2024
- OPT7
Table of Contents
OPT7 Aura Aluminum Underglow LED Lighting Kit
Product Specifications:
- Main Components: Aura Control Box, Hardwire Power Harness, Adhesive Booster, Mounting Kit
- Includes: Wire Mounts, Self-tapping Screws, Booster, Velcro, Zip Ties
- Hand Held Remote Included
- Front Light Bar: 36”
- Left and Right Light Bars: 48” each
- Rear Light Bar: 36”
Product Usage Instructions
Step 1: Control Box Installation
Decide where to place the control box inside the vehicle away from heat sources. Connect all LED bars to the control box using the extension cables provided. Make sure to measure the length required for a successful installation.
Power Harness Connection:
- Connect the Red wire (+) to the vehicle battery’s positive terminal.
- Connect the Black wire (-) to the vehicle battery’s negative terminal or an unpainted area on the vehicle’s frame.
Warning:
- Do not connect to more than 10 AMP to avoid early failure.
- Ensure all components are mounted in areas not exceeding 85 or 185 degrees.
Step 2: Control Box Securement
Use Velcro or zip ties to securely mount the control box in a safe location away from moisture and elements.
Step 3: Light Bar Installation
Secure the light bars using zip ties to keep wiring away from moving components. Confirm the correct direction of the arrows on the light bars to prevent damage due to incorrect installation.
Step 4: Remote Operation
Use the E-Z Remote to select desired colors or patterns. Follow instructions on the remote for different lighting effects and color changes.
Auxiliary Wiring for Door/Dome Light
Follow detailed instructions provided on Door Assist Sync for additional wiring information.
Frequently Asked Questions
Q: Is the control box waterproof?
A: No, the control box is not waterproof and should be installed inside the vehicle away from moisture.
Q: What happens if I connect to more than 10 AMP?
A: Connecting to more than 10 AMP can cause early failure of the product. Ensure proper connection to avoid this issue.
Q: Where can I find additional installation assistance?
A: For detailed instructions and support, visit https://wintis.ladesk.com/549690-AURA-Door-AssistAUX-Installation-Guide or contact customer support for help.
MAIN COMPONENTS
INSTALLATION
STEP 1
Decide where to locate the control box and ensure wiring has enough length for light bars to be installed in desired location
IMPORTANT:
The control box must be installed inside the vehicle as it is not waterproof. Avoid installation areas of the engine bay + heated surfaces.
As shown below, connect all the LED bars to the control box with the included
extension cables
HOW TO CONNECT POWER HARNESS TO YOUR VEHICLE
- Connect the Red wire (+) of power harness to the vehicle battery’s positive terminal.
- Connect the Black wire (-) of power harness to the vehicle battery’s negative terminal or an unpainted area on your vehicle’s frame
WARNING
- Connecting to more than 10 AMP will override the kit and cause early failure, ensure it is 10 AMP or less!! Please ensure that the LED bars or strips/control box/wiring all are mounted in areas where will not exceed 85℃ or 185℉.
STEP 2
Secure Control box in desired location with Velcro or zip ties.
- CONTROL BOX NOT WATERPROOF Ensure the control box is safely and securely hidden from exposing elements of moisture
STEP 3
Secure the light bars using the zip ties to tie all the wiring away from the moving components.
IMPORTANT
BE SURE TO CONFIRM THE CORRECT DIRECTION OF THE ARROW!! TO AVOID PRODUCT
DAMAGE DUE TO INCORRECT INSTALLATION.
STEP 4 Using the included E-Z Remote, select your desired color or
pattern
AUX WIRING FOR A DOOR/DOME LIGHT
Please scan to see a detail instruction on Door Assist Sync or go to
DISCLAIMER
OPT7 Lighting is not liable for damages or personal injuries while installing this product. The Installation Guide is intended as assistance to reduce setup time. OPT7 Lighting assumes no responsibility for improper installation. If you are unfamiliar with your vehicle or inexperienced with aftermarket upgrades, please seek professional assistance.
OPT7 recommends installation for safety and guidance. Modified installations or installation recommendations not specified by OPT7 Lighting will void product warranty
References
- OPT7 - LED Lighting for Cars, Trucks & Motorcycles – OPT7 Lighting Inc
- AURA Door Assist/AUX Installation Guide