OPT7 Aura V1 Aluminum Underglow LED Lighting Kit for RV User Manual
- May 15, 2024
- OPT7
Table of Contents
OPT7 Aura V1 Aluminum Underglow LED Lighting Kit for RV
Product Information
Specifications
- Aura Control Box
- Hardwire Power Harness
- Adhesive Booster
- Mounting Kit – Includes wire mounts, self-tapping screws, booster, Velcro, zip ties
- Handheld Remote Control
FAQ
- Disclaimer:
- OPT7 Lighting is not liable for damages or personal injuries during installation.
- Seek professional assistance if unfamiliar with vehicle modifications.
MAIN COMPONENTS
INSTALLATION
STEP 1
- Decide where to locate the control box and ensure wiring has enough length for light bars to be installed in desired location.
IMPORTANT:
- The control box must be installed inside the vehicle as it is not waterproof. Avoid installation areas of the engine bay + heated surfaces.
As shown below, connect all the LED bars to the control box with the included extension cables.
HOW TO CONNECT POWER HARNESS TO YOUR VEHICLE
- Connect the Red wire (+) of power harness to the vehicle battery’s positive terminal.
- Connect the Black wire (-) of power harness to the vehicle battery’s negative terminal or an unpainted area on your vehicle’s frame.
WARNING
- Connecting to more than 10 AMP will override the kit and cause early failure, ensure it is 10 AMP or less!!
- Please ensure that the LED bars or strips/control box/wiring all are mounted in areas where will not exceed 85℃ or 185℉.
STEP 2
- Secure Control box in desired location with Velcro or zip ties.
-
- CONTROL BOX NOT WATERPROOF
- Ensure the control box is safely and securely hidden from exposing elements of moisture.
- CONTROL BOX NOT WATERPROOF
STEP 3
- Mount brackets to secure the light bars first.
- Secure the light bars using the zip ties to tie all the wiring away from the moving components.
IMPORTANT
- BE SURE TO CONFIRM THE CORRECT DIRECTION OF THE ARROW!!
- TO AVOID PRODUCT DAMAGE DUE TO INCORRECT INSTALLATION.
STEP 4
- Using the included E-Z Remote, select your desired color or pattern.
AUX WIRING
AUX WIRING FOR A DOOR/DOME LIGHT
- Please scan to see a detail instruction on Door Assist Sync or go to https://wintis.ladesk.com/549690-AURA-Door-AssistAUX-Installation-Guide
DISCLAIMER
OPT7 Lighting is not liable for damages or personal injuries while installing
this product. The Installation Guide is intended as assistance to reduce setup
time. OPT7 Lighting assumes no responsibility for improper installation.
If you are unfamiliar with your vehicle or inexperienced with aftermarket
upgrades, please seek professional assistance.
OPT7 recommends installation for safety and guidance.
Modified installations or installation recommendations not specified by OPT7
Lighting will void product warranty.
References
- OPT7 - LED Lighting for Cars, Trucks & Motorcycles – OPT7 Lighting Inc
- AURA Door Assist/AUX Installation Guide
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>