RUGGED RIDGE 17212.13 Elite Antenna Base Instructions
- June 13, 2024
- RUGGED RIDGE
Table of Contents
17212.13 Elite
Antenna Base Instructions
17212.13 Elite Antenna Base
Components
1. Antenna Base (1)
2. M5 Bolt (3)
3. Rubber Gasket (1)
- Unscrew antenna from base. Using a flat head screwdriver, remove factory antenna base cover.
- Remove three factory screws from antenna base.
- Insert three screws into Elite Antenna Base. Press screws through rubber gasket to hold in place.
- Secure bolts onto vehicle, ensuring opening for antenna is facing upwards.
- Re-attach antenna.
**Copyright © 2016 Omix-Ada®, Inc.
**
OMIX-ADA ® TECHNICAL SUPPORT
PHONE: M-F 8am – 5pm EST
1-800-449-6649 | EMAIL: techsupport
@omix-ada.com
FOR WARRANTY INFORMATION VISIT:www.Omix-Ada.com
Copyright © 2016 Omix-Ada ® , Inc.
Documents / Resources
|
RUGGED RIDGE 17212.13 Elite Antenna
Base
[pdf] Instructions
17212.13, 17212.14, 17212.15, 17212.13 Elite Antenna Base, Elite Antenna Base,
Antenna Base
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>