OPT7 AURA Double Row Car LED Lights Interior Installation Guide
- June 1, 2024
- OPT7
Table of Contents
OPT7 AURA Double Row Car LED Lights Interior
Product Information
- Specifications:
- Product Name: Double Row Interior LED Light Kit
- Main Components: LED Strips, Aura Control Box, Y-Splitters, Hand Held Remote, Extension Wires, Cigarette Lighter Power Adapter, Mounting Kit
- Power Supply: 12V DC
- Control Range: Up to 10 meters (33 feet)
- Maximum Amperage: 10A
- Operating Temperature: 85°F (30°C) to 185°F (85°C)
Product Usage Instructions
- Step 1: Pre-Installation Preparation
- Decide where to install the light strips and ensure there is enough wiring length for the control box. Avoid exceeding 10A when connecting.
- Step 2: Control Box Installation
- Secure the control box in a desired location using Velcro or zip ties. Ensure it is protected from moisture as it is not waterproof.
- Step 3: LED Strip Mounting
- Clean the mounting surface with rubbing alcohol. Peel off the double-sided tape on the LED strip and firmly press it onto the surface. Use zip ties to secure the wiring away from moving components.
- Step 4: Remote Operation
- Use the 21Key E-Z Remote to select colours or patterns within a range of 10 meters (33 feet). Follow the correct direction of the arrows to avoid product damage.
- Important Notes:
- Avoid exceeding 10A when connecting to power.
- Ensure the operating temperature is between 85°F to 185°F.
- Keep remote usage within 10m/33ft for optimal performance.
FAQs
- Q: Is the control box waterproof?
- A: No, the control box is not waterproof. It should be securely hidden from moisture exposure.
- Q: What happens if I connect to more than 10A?
- A: Connecting to more than 10A can override the kit and cause early failure. Ensure the amperage is 10A or less.
- Q: How far can I use the remote?
- A: The remote has a range of up to 10 meters (33 feet) for optimal performance.
- Q: Can I install the LED strips on any surface?
- A: It is recommended to thoroughly clean the surface with rubbing alcohol before mounting the LED strips for a firm and long-lasting placement.
MAIN COMPONENTS
INSTALLATION
As shown below, connect all light strips to the control box with the included extension cables.
- STEP 1 Decide where to locate the light strips and ensure the wiring has enough length for the control box to be installed in the desired location.
- WARNING
- Connecting to more than 10 AMPs will override the kit and cause early failure, ensure it is 10AMPs or less!!
- Please ensure that the LED bars or strips/control box/wiring all are mounted in areas that will not exceed 85℃ or 185℉.
- Once connected, plug the control box Cigarette Power Adapter into an available 12-volt charging port.
- STEP 2 Secure the Control box in the desired location with Velcro or zip ties. CONTROL BOX NOT WATERPROOF Ensure the control box is safely and securely hidden from exposing elements of moisture.
- STEP 3 Thoroughly clean the surface where you plan on mounting the LED strip with rubbing/isopropyl alcohol. (This part is essential for a rm and long-lasting placement.
- A dirty surface will prevent the strip from attaching firmly.
- Peel the double-sided tape and firmly press the LED strip to the mounting area and hold for 3 seconds.
- Then, use the zip-ties to tie all the wirings away from all moving components.
- IMPORTANT: BE SURE TO CONFIRM THE CORRECT DIRECTION OF THE ARROW!! TO AVOID PRODUCT DAMAGE DUE TO INCORRECT INSTALLATION.
- STEP 4 Using the included 21Key E-Z Remote, select your desired color or pattern.
- ( Note: When you use this product, keep it within 10m/33ft as much as possible)
DISCLAIMER
- OPT7 Lighting is not liable for damages or personal injuries while installing this product.
- The Installation Guide is intended as assistance to reduce setup time.
- OPT7 Lighting assumes no responsibility for improper installation.
- If you are unfamiliar with your vehicle or inexperienced with aftermarket upgrades, please seek professional assistance.
- OPT7 recommends installation for safety and guidance.
- Modified installations or installation recommendations not specified by OPT7 Lighting will void the product warranty.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>