LUCiDE 00124/01/30 RUBEN Flush Ceiling Light Instruction Manual
- June 12, 2024
- LUCIDE
Table of Contents
LUCiDE 00124/01/30 RUBEN Flush Ceiling Light
Product Information
Thank you for purchasing a Lucide original! Our aim is to inspire and
illuminate our clients by offering trendy, high-quality, and affordable
lighting. Welcome to the community of #illuminatesyourworld.
Recommended Lucide Light Source
- Dimmable: Yes
- Included: No
- Item number: 00124/0130
- EAN code: 5411212000187
General
- Dimensions LxWxH: 22cm x 22cm x 22cm
- Main material: Metal
- Color: Black and Matt Gold/Brass
- Style: Modern
- Shape: Square
- Weight: 0.90 kg
Ruben Specifications
- Dimmable: Yes
- Light direction: Around (Diffuse)
- Adjustable in height: Not In Height Adjustable
- Directional: Not Directional
- Cable: No Cable On Product
- Sensor: Without Sensor
- Control: Light Switch Control
- Power supply: Adapter/Power Grid
- IP-Class: 20
- Electric Class: 1
- Number of light sources: 1
- Lamp socket: E27
- Maximum wattage: 40 W
- Power requirements: 220-240 V~50 Hz
- Warranty: 2 Years
For more specifications of this product, please visit www.lucide.com.
Technical Drawing & Dimensions
- Item number: 00124/0130
- EAN code: 5411212000187
For more specifications or dimensions of this product, please visit www.lucide.com.
Installation Drawing Specifications
- Item number: 00124/0130
- EAN code: 5411212000187
Safety Instructions
Explanation of the symbols which can appear on the fixture:
-
This item is only suitable for indoor use, exclusive bathroom (except if a higher IP degree permits that the item can be used in the bathroom).
-
IP 44
-
Legislation requires that all electrical and electronic equipment must be collected for reuse and recycling. Electrical and electronic equipment marked with this symbol for separate collection of such equipment must be returned to a municipal waste
collection point. -
Class I: The product is grounded. The grounding wire (green-yellow) must be connected to the ground connection (marked with this symbol).
-
Class III: The product is only suitable for lower supply voltage and must not be connected to the grounding wire.
-
IP 20: Protection against touch with a finger.
-
If the protective glass is damaged or broken, it must be replaced immediately.
-
Respect the minimum distance between the lamp and flammable objects.
Explanation of the symbols which can appear on the fixture
- IP 44
- IP 20: Protection against touch with a finger.
- Please respect the minimum distance between the bulb and flammable objects.
Product Usage Instructions
- This product is suitable for indoor use only, excluding bathrooms (unless a higher IP degree allows bathroom usage).
- Make sure to use the recommended Lucide light source with the following specifications:
- Dimmable: Yes
- Included: No
- Item number: 00124/0130
- EAN code: 5411212000187
- Before installation, refer to the technical drawing and dimensions provided for accurate placement.
- Ensure that the product is properly grounded. Connect the grounding wire (green-yellow) to the ground connection marked with the appropriate symbol for Class I products.
- If applicable, adjust the height of the light source as needed.
- If the product has a light switch control, use it to turn the light on/off.
- For power supply, use either an adapter or connect to a power grid.
- Be aware of the IP-Class rating of 20, indicating limited protection against solid objects and no protection against water.
- The product operates at an electric class of 1 and requires a power input of 220-240 V~50 Hz.
- Use an E27 lamp socket and ensure that the maximum wattage does not exceed 40 W.
- Always follow the safety instructions provided to prevent accidents and ensure proper usage.
- If any component, such as the protective glass, is damaged or broken, replace it immediately.
- Respect the minimum distance between the lamp and flammable objects to avoid fire hazards.
Thank you for purchasing a Lucide original! This manual will hopefully guide you easily through the installation process. We aim to inspire and illuminate our clients by offering trendy, high-quality and affordable lighting. Welcome to the community of #illuminatesyourworld
General
- Dimensions LxWxH: 22cm x 22cm x 22cm Main material: Metal
- Color: Black and Matt Gold / Brass
- Style: Modern
- Shape: Square
- Weight: 0,90kg
Specifications
- Dimmable: Yes
- Light direction: Around (Diffuse)
- Adjustable in height: Not In Height Adjustable Directional: Not Directional
- Cable: No Cable On Product
- Sensor: Without Sensor
- Control: Light Switch Control
- Power supply: Adapter/Power Grid
- IP-Class: 20
- Electric Class: 1
- Number of light sources: 1
- Lamp socket: E27
- Maximum wattage: 40W
- Power requirements: 220-240V~50Hz Warranty: 2 Years
RUBEN
Safety Instructions
Please read this notice carefully and keep it during the lifetime of this product. Follow the instructions for a safe and correct installation and functioning of the light fixture. The manufacturer does not accept any responsibility for damage caused by improper installation and service. Installation should always be done by a qualified electrician. Always isolate the power before commencing installation, maintenance or repair. In case of doubts, please contact a qualified electrician. Please pay attention to locations where the item can be installed (indoor, outdoor, bathroom (for outdoor and bathroom installa-tion, please see further). Indoor items cannot be used in humid places. Do not put the item in contact with water or any liquids or inflammable products. Always respect the minimal distance (indicated on the light) to inflammable products. During installation, make sure that the cables will not be squeezed or damaged by sharp edges. If the external flexible cable is damaged, it needs to be replaced exclusively by the manufacturer, his service agent, or a qualified electrician. This is to avoid all risks. Because the temperature of the item and the bulbs can get very high, they must cool down before being touched. Always use the correct bulb (respect type and maximal wattage as indicated on the product).
Explanation of the symbols which can appear on the fixture
This item is only suitable for indoor use, exclusive bathroom (except if a higher IP degree permits that the item can be used in the bathroom).
Legislation requires that all electrical and electronic equipment must be collected for reuse and recycling. Electrical and electronic equipment marked with this symbol indicating a separate collection of such equipment must be returned to a municipal waste collection point.
Class I: The item has an earth connection. The earth wire (green-yellow) needs to be connected to the earth connection (marked with this symbol).
Class II: The item is double insulated and must not be connected to the earth wire.
Class III: The item is only suitable for lower voltage supply and must not be connected to the earth wire.
IP 20: Protection against contact with a finger
If the protection glass is damaged or broken, it needs to be replaced immediately.
Please respect the minimum distance from the bulb to inflammable objects.
Warranty declaration
Lucide NV warrants that the products supplied will be free from defects in
material and workmanship for a period of 2 years from the date of purchase by
the end user if the item is installed and maintained properly as mentioned in
the user manual.
Exclusions for the warranty:
- Broken glass parts of the fixture will only be replaced within 14 days after purchase by the end user.
- Normal wear and tear, and discoloring as a result of normal use.
- Damage is caused by external causes like fire, water, wrong use/ installation, or maintenance of the product. For warranty claims, the customer needs to hand over the defective fixture/part and the original purchase ticket.