OPT7 Aura V1 Interior Single 6pc Lighting Kit Installation Guide
- October 30, 2023
- OPT7
Table of Contents
INTERIOR
6PC INSTALLATION GUIDE
MAIN COMPONENTS
INSTALLATION
STEP 1
Decide where to locate the light strips and ensure wiring has enough length
for control box to be installed in desired location.
As shown below, connect all light strips
to the control box with the included extension cables. 
WARNING
- Connecting to more than 10 AMP will override the kit and cause early failure, ensure it is 10AMPs or less!!
- Please ensure that the LED bars or strips/control box/wiring all are mounted in areas where will not exceed 85 ℃ or 185 ℉.
Once connected, plug the control box Cigarette Power Adapter into an available
12 volt charging port.
STEP 2
Secure Control box in desired location with Velcro or zip ties.
- CONTROL BOX NOT WATERPROOF
Ensure the control box is safely and securely hidden from exposing elements of moisture.
STEP 3
Thoroughly clean the surface where you plan on mounting the LED strip with rubbing / isopropyl alcohol. (This part is essential for a rm and long lasting placement.
A dirty surface will prevent the strip
from attaching rmly.) Tear o the 3M Double-sided tape and rmly press the LED
strip to the mounting area and hold for 3 seconds.Then use the ZIp-Ties to tie
all wiring away from all moving components.
STEP 4
Using the included 21Key E-Z Remote, select your desired color or pattern.
( Note: When you use this product, keep it within 10m/33ft as much as possible
)
| Power | 1 | ON |
|---|---|---|
| Automatic Color Change | 2 | |
| Power | 3 | OFF |
| Speed | 4 | 9 Levels |
| Mode | 5 | 3 Modes |
| Dimmer | 6 | 9 Levels |
| Color Selection | 7 | 9 Colors |
| SoundSYNC | 8 | 3 Modes |
DISCLAIMER
OPT7 Lighting is not liable for damages or personal injuries while installing
this product. The Installation Guide is intended as assistance to reduce setup
time.
OPT7 Lighting assumes no responsibility for improper installation.
If you are unfamiliar with your vehicle or inexperienced with aftermarket
upgrades, please seek professional assistance.
OPT7 recommends installation for safety and guidance.
Modified installations or installation recommendations not specified by OPT7
Lighting will void product warranty.