SABRENT HB-U930 7 Port USB 3.0 HUB 2 Charging Ports User Manual
- June 5, 2024
- Sabrent
Table of Contents
SABRENT HB-U930 7 Port USB 3.0 HUB 2 Charging Ports
INTRODUCTION
- Connect the hub’s USB cable to an available USB port on your computer or laptop.
- Connect the other end of the cable to the square port of the hub.
- Connect the power adapter into the hub’s power jack.
- Connect the other end of the power adapter into a power outlet.
Drivers install automatically. Once installed, you can begin use of the hub.
Enjoy
At this point, the 7 Port USB 3.0 Hub is completely installed– no software drivers are needed to complete the installation. Thank you for choosing Sabrent and enjoy!
- For installation issues please contact: Support@Sabrent.com
If A Power Surge Occurs
The power to the hub is disconnected and the red LED indicator turns off. The “USB Hub Current Limit Exceeded” window opens. Click “Reset” to resume work, or unplug the USB cable, then plug it back in.
Hub Will Not Recognize My USB Device
Make sure the USB cable is securely connected to your hub and computer or laptop. Try connecting the hub to a different USB port on your computer or laptop. Connect the power adapter from the hub to a power outlet. Make sure you have the most recent updates for your operating system. Make sure your power outlet is working. Plug your USB device directly into a USB port on your computer. If your computer still does not recognize the device, the problem is with the device.
Connection is Slow
Make sure the hub is connected to a USB 3.0 port on your computer the laptop. While the hub is backward compatible, when connected to a, USB 2.0 or USB 1.1 port, the hub operates at slower speeds. Connect the power adapter to the hub and a working power outlet.
USB Device Will Not Charge
Connect the power adapter to the hub and a working power outlet. Make sure the USB cable is securely connected to your hub and computer or laptop. Use one of the two USB ports on the front for high-power charging.
Hub Disconnects From Computer 0r Laptop
Make sure the USB cable is securely connected to your hub and computer or laptop. Connect the power adapter to the hub and a working power outlet. Try connecting the hub to a different USB port on your computer or laptop. Check your computer’s sleep or standby settings.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>