OPT7 Aura 4PCS LED Grille Lights with Remote Control Installation Guide
- May 15, 2024
- OPT7
Table of Contents
OPT7 Aura 4PCS LED Grille Lights with Remote Control
Product Information
Specifications
- Main Components: Light Strips, Aura Control Box, Remote, Mounting Kit, Hardwire Power Harness, Extension Wires
- Control Box: Not waterproof
- Button Layout: ON, AUTO, OFF, S+, M+, S-, M-
- Power Requirement: 10 AMPs or less
- Operating Temperature: Below 85 or 185 degrees Fahrenheit
Product Usage Instructions
Installation
-
Step 1: Prepare Light Strips and Control Box
Decide where to locate the light strips and ensure the wiring has enough length for the control box to be installed in the desired location. Connect all light strips to the control box using the included extension cables. -
Step 2: Secure Control Box
Secure the control box in the desired location using Velcro or zip ties. Ensure the control box is not exposed to moisture. -
Step 3: Secure Light Strips
Secure the light strips using zip ties to tie all wiring away from moving components. Confirm the correct direction of the arrows on the light strips to avoid product damage. -
Step 4: Control Box Setup
Use the included E-Z Remote to select your desired color or pattern according to the button layout provided. Be cautious not to exceed the power requirement of 10 AMPs.
Disclaimer
OPT7 Lighting is not liable for damages or personal injuries during
installation. Seek professional assistance if unfamiliar with vehicle
modifications or aftermarket upgrades. Follow recommended installation
guidelines for safety and warranty purposes.
Frequently Asked Questions (FAQ)
-
Q: What happens if I connect to more than 10 AMPs?
A: Connecting to more than 10 AMPs will override the kit and cause early failure. Ensure the power requirement does not exceed 10 AMPs. -
Q: Can the control box be exposed to moisture?
A: No, the control box is not waterproof. Ensure it is safely hidden from elements of moisture during installation. -
Q: What should I do if I am unsure about the installation process?
A: If you are unfamiliar with vehicle modifications or aftermarket upgrades, seek professional assistance to avoid improper installation and potential damage.
MAIN COMPONENTS
INSTALLATION
STEP 1
Decide where to locate the light strips and ensure the wiring has enough
length for the control box to be installed in the desired location. As shown
below, connect all light strips to the control box with the included extension
cables.
WARNING
- Connecting to more than 10 AMPs will override the kit and cause early failure, ensure it is 10AMPs or less!!
- Please ensure that the LED bars or strips/control box/wiring all are mounted in areas that will not exceed 85℃ or 185℉.
STEP 2
Secure the Control box in the desired location with Velcro or zip-ties.
CONTROL BOX NOT WATERPROOF Ensure the control box is safely and securely
hidden from exposing elements of moisture.
STEP 3
Secure the light strips using the zip ties to tie all the wiring away from the
moving components.
IMPORTANT!
BE SURE TO CONFIRM THE CORRECT DIRECTION OF THE ARROW!! TO AVOID PRODUCT
DAMAGE DUE TO INCORRECT INSTALLATION.
STEP 4
Using the included E-Z Remote, select your desired color or pattern.
BUTTON LAYOUT
- Power-ON
- Automatic Color Change
- Power-OFF
- Speed +/- 8 Levels
- Mode +/- 19 Mode
- Dimmer 8 Levels
- Color Selection 12 Colors
DISCLAIMER
OPT7 Lighting is not liable for damages or personal injuries while installing this product. The Installation Guide is intended as assistance to reduce setup time. OPT7 Lighting assumes no responsibility for improper installation. If you are unfamiliar with your vehicle or inexperienced with aftermarket upgrades, please seek professional assistance.
OPT7 recommends installation for safety and guidance. Modified installations or installation recommendations not specified by OPT7 Lighting will void the product warranty.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>