BEGA 95 044 Bicycle Stand For Non Residential Areas Instruction Manual
- June 1, 2024
- BEGA
Table of Contents
BEGA 95 044 Bicycle Stand For Non-Residential Areas
Product Information
Specifications
- Model: 95 044
- Dimensions: 960 x 300 x 108 mm
- Material: Steel
- Weight: 1.5 kg
Product Usage Instructions
Step 1: Assembly
- Identify all components labeled with A and B.
- Ensure you have the necessary tools like a 17mm wrench and a 13mm wrench.
- Refer to the diagram for the proper placement of each component.
Step 2: Installation
- Start by assembling part A following the sequence of steps provided.
- Then proceed to assemble part B in the same manner.
- Make sure to leave a minimum clearance of 40mm for part 71 351.
Step 3: Finalizing
- Tighten all bolts using the specified wrench sizes (17mm and 13mm).
- Double-check the assembly to ensure all parts are securely in place.
Frequently Asked Questions (FAQ)
Q: How do I adjust the product once installed?
A: To adjust the product, simply use the provided wrenches to loosen or tighten the bolts as needed.
Q: Can this product be used outdoors?
A: This product is designed for indoor use only due to its material composition.
Dimension
Bicycle stand for non-residential areas
Installation instructions
- BEGA Gantenbrink-Leuchten KG · Postfach 3160 · 58689 Menden
- info@bega.com
- www.bega.com
Documents / Resources
| BEGA
95 044 Bicycle Stand For Non Residential
Areas
[pdf] Instruction Manual
95 044 Bicycle Stand For Non Residential Areas, 95 044, Bicycle Stand For Non
Residential Areas, Stand For Non Residential Areas, For Non Residential Areas,
Non Residential Areas, Residential Areas
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>