PROJECT E BEAUTY PE706 Photon Skin Rejuvenation Face & Neck Mask User Manual
- June 5, 2024
- PROJECT E BEAUTY
Table of Contents
PE706 Photon Skin Rejuvenation Face & Neck Mask
User Manual
Introduction
Thank you for purchasing the Photon Skin Rejuvenation Face & Neck Mask (Model No. PE706). This device uses colored LED lights to provide pure light to treat a variety of skin conditions and rejuvenate skin while reducing scar tissue. Unlike other beauty devices, this mask provides high-quality LED photon treatment that has been scientifically validated, so you can achieve efficient results faster than you ever imagined.
Photon light therapy works by using the natural healing properties present in different wavelengths of light to treat various skin tissue issues. These state-of-the-art LEDs provide the purest light possible, especially compared to systems that use more traditional bulbs. Modern semiconductor technology has allowed dermatologists to perfect what wavelengths of light are generated, meaning more of the healing energy of the light reaches the skin tissue.
Exposing the skin’s tissue surface to light activates natural photoreceptors and allows the skin cells to absorb the energy found in the light. This process accelerates biochemical reactions in the skin tissue, ultimately, leading to faster healing times, while increasing the production of collagen. This can reverse some of the more heinous effects of aging.
This technology is safe. Cosmetology experts agree these treatments have no
noticeable side effects if they’re administered correctly.
Treatment methods provided by the LED photon mask are an important component
of a complete skincare routine and should only be used for cosmetic purposes.
This is not intended in any way to diagnose, treat, cure, or prevent any
disease or diseases.
Benefits of Photon LED Therapy
Recent cosmetology breakthroughs have shown that LED light therapy is effective for treating several aspects of skin aging. Studies suggest this therapy can reduce the appearance of fine wrinkles, rough skin, shallowness of the flesh, and mottled hyperpigmentation. The LED light therapy increases both the proliferation and the initial production of collagen. A few studies have also suggested this therapy can cut down on the types of bacteria that cause spots and pimples. This might also help to eliminate breakouts and minimize the level of scar tissue.
Each of the colors of LED light have a different specific function. They are each selectable by way of the control box.
Red Light (-630 nm):
This setting allows the LED mask to penetrate the skin more deeply. Red light
penetrates the skin approximately 8-10 mm, which stimulates the cells that lie
at this layer. Many are fiber cells, and stimulating them can aid in the
production of collagen. It can reduce wrinkles and make skin elastic and
smooth. It’s ideal for Improving skin In the area around the eyes and
forehead. It works well to cut down on fine lines. Those who need to repair
damaged skin will opt for this setting.
Blue Light (-415 nm):
This setting allows the energy from the LED mask to penetrate the skin
approximately O.Smm. It’s optimized for use with rashes and is suitable for
skin that is sensitive or constantly oily. Blue light can help to reduce acne
and even tighten skin that has loosened. It can quickly inhibit inflammation
and possibly even destroy harmful bacteria.
Green Light (-525 nm):
This setting can help with mixed skin complexions and will help to brighten
dull skin that has lost its luster. Studies suggest that green light can help
to clear the face’s natural lymphatic system. It might even aid in providing
relief for mental stress, which Is of special importance, as many people use
the LED photon facial mask while they relax.
Purple Light (-390 nm):
This setting improves blood circulation with the function of promoting the
activation of skin tissue. The purple light can strengthen the protein fiber
tissue and shrink pores. It can also help to get rid of yellowish complexion
and remove wrinkles and acne. At the same time, it accelerates blood
circulation and lymph metabolism.
Cyan Light (-490 nm):
This setting provides gentle acne treatment and mitigates skin inflammation.
It can be used to adjust and improve the gland function of oily, black, and
pink skin as well as acne. Meanwhile, the cyan light Is able to promote the
synthesis of protein and collagen that activate skin cells and provide the
relaxation of skin contraction efficiently.
Yellow Light (-450 nm):
This setting revitalizes the lymphatic and nervous systems, and strengthens
the muscular and immunological systems, whiles simultaneously improving and
balancing sensitive skin. Yellow light improves microcirculation, adjusts
factors, and inhibits melanin production in order to fade dark spots,
freckles, and blemishes- es. This method of skin rejuvenation is recommended
as an effective treatment for skin problems caused by age and sun exposure.
White Light (Mix):
This setting synergistically helps activate your skin’s natural renewal system
to reverse the effects of aging at the same time restoring a younger and
healthier skin.
Safety Information
Precautions:
- Read all instructions before using your Photon Skin Rejuvenation Face & Neck Mask and make sure you understand all of the operating instructions.
- Always check the device before use to ensure it is undamaged. The use of a damaged device can be unsafe.
- Stop immediately, if you experience any adverse effects or have a concern regarding use.
- Do not look directly or shine light in the eyes while in operation.
- Do not use on eyelids; do not place the light over eyelids.
- Do not use if you are pregnant.
- Do not use if you have experienced a migraine in the last two years.
- Do not use over any suspicious or cancerous lesion. Consult your doctor.
- Do not use the LED mask while using any product that contains AHA or glycolic acid. This can cause unwanted levels of stress in the skin.
- Do not allow children to use the device unsupervised.
- Always unplug the device correctly by holding the plug and removing it from the electrical socket.
- Remember that improper maintenance or negligence can cause damage and void the warranty. This also refers to improper storage.
Safety Instructions
- Read these instructions, hold onto them, follow them, and always heed all warnings.
- Never use the device near water or areas of concentrated humidity.
- Disinfect the LED surface cover with a soft cloth and a light concentration of rubbing alcohol. Carefully clean the machine of all types of skin oil.
- Always use the device in line with the manufacturer’s regulations, and never block any of the ventilation openings on the side of the mask.
- Dispose of all products in accordance with local and national regulations and codes.
- Do not use if you are sensitive to light. If you are unsure whether you have increased sensitivity to light, we recommend you perform the Light Sensitivity Test instructed in this manual.
- Do not use if you are taking drugs known to make you sensitive to light. You may be sensitive to light and not know it. There are photosensitizing agents in drugs, foods, soaps, cosmetics, and dyes.
- Drugs that are known to cause light sensitivity: Antibiotics; NSAIDS; Diures; Retinoids; Hypoglycemics, HMG-CoA reductase inhibitors (statins), Photodynamic Therapy drugs, Prophoto sensitizers, Neuroleptic drugs, or Antifungals.
- Do not use over or near a recent steroid injection. Doing so may result in a photosensitive reaction.
Warning
-
Discontinue use if you encounter any discomfort or skin redness that lasts for more than two hours. You may have sensitivity to light or another condition. Consult your health care provider.
]Never operate this device it has a damaged cord or plug if it is not working properly, if it has been dropped or damaged, or submerged in water. Return the device to Project E Beauty for examination and repair. -
Do not set or keep the device where it can fall or be pulled into a tub or sink. Keep away from water (including bath and shower). If the device accidentally falls in water unplug it immediately.
-
Keep away from flammable aerosol products.
-
Do not use other AC Power Supplies or Chargers with your LED mask.
-
Turn off immediately, if the mask begins to overheat.
Contraindications
DO NOT USE if one ofthe following pertains to you.
Light Sensitivity: Do not use if you are sensitive to light. You are
sensitive to light if you experience any discomfort or skin redness that lasts
more than two hours. Discontinue using the device and consult with your
healthcare provider.
Implantable Device: Do not use this device if you have a cardiac
pacemaker, implanted defibrillator, shunt, or other implanted electronic
device. This device contains magnets that may cause interference with these
devices resulting in serious injury or death.
Pregnant: Do not use if you are pregnant or think you might be pregnant.
The device has not been tested on pregnant women and the effects, if any, are
unknown.
Migraine: Do not use if you have experienced a migraine in the last two
years.
Seizures: Do not use if you have a history of light-triggered seizures.
Lesions: Do not use this device over any suspicious or cancerous lesions.
To do so may result in delaying the best medical treatment.
Failure to use and maintain the LED mask in accordance with the
instructions outlined in this manual will invalidate the warranty.
What is Included
- LED Mask Device (Face and Neck)
- Split USB Cable
- Control Box
- Elastic Neck Band
- Side Temples
- AC Power Adaptor
- Owner’s Manual (Not Depicted)
Light Sensitivity Test
Recommended Before Use
In order to determine if you have a Light Sensitivity Issue please follow the
instructions below. It is recommended that you test a small, less sensitive
area of skin (i.e., like your forearm).
- Press the “Power” button to turn on the mask and then press the “Star/Stop” button to activate the mask LEDs. Press the “Color” button to toggle different colors.
- Place the device on an area of the forearm. Leave in contact with your skin for a 3-minute treatment cycle.
- Repeat by doing another 3-minute treatment on the same area of your arm.
- Wait 24 hours. You should NOT experience any adverse reaction during the next 24 hours.
A bad reaction to light occurs if you have pain or discomfort in the treatment areas or any skin redness for more than two hours. It can be due to medication, supplements, or a possible skin issue.
Eye Safety
- The design of this mask does not cover the eye area. Therefore, it is not needed to put on eye protection while performing treatments.
Be sure you never look directly into the LEDs.
2. It is suggested the user selects the low energy mode at the beginning and then adjusts to a higher energy level once the user is adapted.
3. It is NOT recommended to shine the light source directly into the eyes or the eyes of others.
Use of the Device
Follow these steps to ensure proper operation during a treatment:
-
Photon LED Skin Rejuvenation Facial Mask so that the mask can be worn comfortably on the face. Attach the elastic strap to each side of the neck treatment part and adjust the strap for a comfortable fit. Make sure the Photon LED Mask is never worn too tightly against the face.
-
Plugin the USB wire into the upper side of the control box. (Please confirm the control box is fully charged before use.) Do not force the USB plug into the jack. If it does not fit, turn the plug around and carefully try and insert in the opposite direction.
-
Disinfect the surface with a solution of alcohol if necessary. Make sure your face is clean before using the mask.
-
Use a serum, ion gel, essence or cream on the face and neck to achieve the best results.
You can purchase our Project E Beauty Serum at www.projectebeauty.com -
Place the mask over the face, using the strap to hold the neck and mask in place. Adjust the straps as required. You may wish to lie back to ensure good contact.
-
Press the button marked Power to turn on the unit. A green indicator LED will switch itself on when this button is pressed.
-
Press the Start/Stop button to turn on the mask LEDs.
-
Use the color button on the control box to toggle between the desired color settings of the mask.
-
Select a power level by using the Energy +/- buttons. The highest level is five(S).
-
Select a time limit for the mask, using the duration +/- buttons. The highest duration is 60 minutes.
-
To charge the controller please plug it into a power socket.
It’s suggested that you do not use the mask for more than 20 minutes each time. The suggested operating time is between 1 O and 15 minutes. More than likely, you will want to start with one 10-minute treatment, 4 times a week to start, unless otherwise directed by a doctor. Once you have achieved your initial goals, you will, more than likely, want to drop down to using the device only twice a week. As the LEDs provide a pure and powerful output, these few treatments will be sufficient.
The mask will automatically shut the LEDs off, once the time limit runs out. To turn the device off before 10 minutes, use the ON/OFF switch on the control box. Other time amounts can also be specified with the control box. If you have sensitive skin, then you may wish to start with short periods of time and work your way up. Never go beyond whatever level you feel is comfortable.
Maintenance
- Be sure to unplug the device properly by holding the plug and removing it from the AC outlet.
- Disinfect the mask surface with 70% alcohol and a soft cloth after each use.
- Immediately dry the surface any time it comes into contact with moisture, chemicals, or water.
- Always keep the device clean and sterilized.
- Store the device in a clean and dry place.
Specifications
Red Light Photon Wavelength…………………………………………… 630 nm ±5%
Blue Light Photon Wavelength………………………………………….. 415 nm ±5%
Green Light Photon Wavelength……………………………………….. 525 nm ±5%
Purple Light Photon Wavelength………………………………………. 390 nm ±5%
Cyan Light Photon Wavelength…………………………………………. 490 nm ±5%
Yellow Light Photon Wavelength………………………………………. 590 nm ±5%
Power Output……………………………………………………………………………. 5,1 W
Input Voltage…………………………………………………………………….. 100V-240V
Warranty
Activate Your 1-Year FREE Warranty Now.
This product comes with a full one-year warranty against manufacturer defects.
It does not include damage caused by misuse, accident, abuse, neglect or other
external causes.
All we need is your name, email, and order ID. That’s it.
Scan the QR code or visit
www.projectebeauty.com/pages/warranty
Questions
Website: www.projectebeauty.com
Email: sales@projectebeauty.com
Tel: +1-626-759-4232
Our customer care expert team is here to answer any question you might want to
ask.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>