TOPICON HK LIMITED MDT86 Tablet User Guide

**TOPICON HK LIMITED MDT86 Tablet User Guide

**

Accessories highlights

1. Plastic Tape for cradle back connector if not used
2. Metal Stand (Be a desktop dock station)
3. Keys and Screws
4. Cable used for vehicle cradle, it can connect to cradle bottom side
5. Metal Mount
6. Type C cable for home adapter
7. NFC Card
8. Vehicle cradle or desktop dock station
9. Cradle extension cable (connected to new cable for power supply)

2 in 1 full features cradle (desktop dock station or vehicle cradle)

To be desktop dock station

• Metal plate at the bottom.
• Mainly use the connector (type C for charging) at the back. Please note that the adapter needs to be high power (Support PD fast charging).
  

To be vehicle cradle

• No metal plate at the bottom
• Use the molex connector at the bottom. The LAN (RJ45) connector and other connector at the back is optional. If not used, it can be closed by a plastic tape, see below.

Without metal plate

Lock the Molex connector to the cradle by screw

Bottom Cable

• Cradle cable(CAB-MB-FULL)

• cradle extension cable (CAB-EX-FULL)

• camera hub cable(CAB-EX-HUB)

Bottom cradle cable can offer below function in full features cradle

• Vehicle Input: DC 9V to 36V, ignition control with optional switch in the cradle
• Serial port: RS485 x 1, RS232 x 2
• Support one channel video input (Support AHD 720P, 1080P and Analog camera)
• Support four channels video input, connect to Camera Hub by extension cable (Refer to the Camera Hub manual), with 4 trigger input
• I/O: Analog input ADC x 1, Digital input x 2, Digital output x 1

Cable pin assignment overview

Cable specification below

P2 Power and serial port connector

P3 Camera Hub connector

P5 GPIO Wires

GPIO Demo APK

CRD1060GPIO_demo20220419.apk and surce code link:
https://drive.google.com/file/d/1ZLEyXAlZxOo0EjTW6ks7oMGjwnLiYcrQ/view?usp=sharing

Power and Serial port extension cable

P6 Connector connect to the P2 connector
P7 Connect the Vcc (red wire), ignition (green wire) and GND (black wire) to the power supply (DC9V-36V)
P8 serial port RS232 and RS485 wires

RS232 purple/white is from CPU, it’s same as mdt860 and mdt760, it can work even no external power supply.
RS232 orange/yellow and RS485 blue/brown are converted from USB Hub and will only work if there is an external power supply.

Serial port demo APK

SerialPort_20220712.apk and surce code link:
https://drive.google.com/file/d/1Pm7TZcbzJ6jzWnTNwdlV8jliVyC1haT3/view?usp=sharing

Device tty port option:
RS232 purple/white is ttyUser
RS232 orange/yellow is ttyUSB0
RS485 blue/brown is ttyUSB1

When installing in the vehicle, pls use below metal parts, it has 2 purposes

1. let the cable to the toward the back side
2. It can use for supporting as the device is quite heavy. It will not shake even the car has vibration.

There are few options. If there are supporting at the bottom or at the back (with angle), you can make different installation (see below 2 video)

It can be changed the length from 50mm to 80mm

https://drive.google.com/file/d/1ybp_Ji3AL1t94PQ_KVtJO9mk_J8UiY8Q/view?usp=sharing
https://drive.google.com/file/d/1etWxYVJcbXDs8J- GP0dq8IVuBiYc0t3S/view?usp=sharing

Basics vehicle cradle

only 1xRS232, 1x OTG and vehicle Vcc (12-24V) input, Ignition, NO type C charging even plug to tablet all connector at the back will be closed

Bottom cable

CRD1060 basic cable (CAB-MB-BASIC)

Extension cable (CAB-EX-BASIC)

Basic Cable specification below

P2 Connector

P3 Connector

Extension cable specification below

P2 Wires

Caution: Use the Product in the environment with the temperature Between -10℃ and 40℃; Otherwise, it may damage your product. Products can only be used below 2000m altitude.

For the following equipment:
Product Name: Tablet
Brand Name: —
Model No.: MDT865, PaceBlade MDT-801, OBC865, M865A, M865B, MDT865D
TOPICON HK LIMITED
E-mail: keller.sin@topicon.hk

hereby declares that this [Name: Tablet, Model: MDT865, PaceBlade MDT-801, OBC865, M865A, M865B, MDT865D] is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.

Adapter shall be installed near the equipment and shall be easily accessible.
Only can use adapter as below:
Power Adapter Model: GS-W20A0938
Input: 100- 240Va.c. 50/60Hz 0.6A Max
Output: 5Vd.c. 3A or 9Vd.c. 2.22A or 12Vd.c. 1.67A
Shenzhen Good-she technology Co., Ltd
The plug considered as disconnect device of adapter. RED Article 10 2
This product can be used across EU member states

RED Article 10 10

• The product is class 1 product, No restrictions

The RF distance between body and product is 0mm

2G

Frequency Range:
GSM900: Tx: 880-915MHz, Rx: 925-960MHz
DCS1800: Tx: 1710-1785MHz, Rx: 1805-1880MHz
RF Output Power:
GSM900: 32.80dBm, GSM1800: 31.06dBm
EDGE900: 26.89dBm, EDGE1800: 26.97dBm

3G

Frequency Range:
WCDMA Band 1: Tx: 1920-1980MHz, Rx: 2110-2170MHz
WCDMA Band 8: Tx: 880-915MHz, Rx: 925-960MHz
RF Output Power: WCDMA Band 1: 24.03dBm, WCDMA Band 8: 22.95dBm

4G

Frequency Range:
FDD-LTE Band 1: Tx: 1920-1980MHz, Rx: 2110-2170MHz
FDD-LTE Band 3: Tx: 1710-1785MHz, Rx: 1805-1880MHz
FDD-LTE Band 7: Tx: 2500-2570MHz, Rx: 2620-2690MHz
FDD-LTE Band 8: Tx: 880-915MHz, Rx: 925-960MHz
FDD-LTE Band 20: Tx: 832-862MHz, Rx: 791-821MHz
FDD-LTE Band 28: Tx: 703-748MHz, Rx: 758-803MHz
TDD-LTE Band 38: Tx: 2570-2620MHz, Rx: 2570-2620MHz
TDD-LTE Band 40: Tx: 2300-2400MHz, Rx: 2300-2400MHz
Max.RF Output Power:
FDD-LTE Band 1: 23.65dBm, FDD-LTE Band 3: 23.31dBm,
FDD-LTE Band 7: 24.11dBm, FDD-LTE Band 8: 23.44dBm ,
FDD-LTE Band 20: 23.31dBm , FDD-LTE Band 28: 23.34dBm ,
TDD-LTE Band 38: 24.19dBm, TDD-LTE Band 40: 23.68dBm

Bluetooth
Frequency Range: 2402-2480MHz
Max.RF Output Power: 9.46dBm (EIRP)
Wi-Fi (2.4GHz)
Support Standards: 802.11b, 802.11g, 802.11n-HT20/40
Frequency Range:
2412-2472MHz for 802.11b/g/n(HT20)
2422-2462MHz for 802.11n(HT40)
Max.RF Output Power: 15.39dBm (EIRP)

NFC

Frequency Range: 13.56MHz
Radiated H-Field: 14.49dBuA/m(@3m)

LORA

Frequency Range:
868.00MHz-868.6 MHz
869.4MHz-869.650 MHz
RF Output Power:
868.1MHz: 13.04dBm(ERP)
868.3MHz : 13.03dBm(ERP)
868.5MHz: 13.02dBm(ERP)
869.525MHz: 13.06 dBm(ERP)

GPS

Frequency Range: 1575.42MHz Receiving

The power, frequency are only applicable to EU.

FCC Radiation Exposure Statement

This device meets the government’s requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. The SAR limit of USA (FCC) is 1.6 W/kg averaged. Device types: Tablet (FCC ID: 2AHAF-MDT86) has also been tested against this SAR limit. SAR information on this and other pad can be viewed on‐line at http://www.fcc.gov/oet/ea/fccid/. Please use the device FCC ID number for search. This device was tested simulation typical 0mm to body. To maintain compliance with FCC RF exposure requirements, use accessories should maintain a separation distance between the user’s bodies mentioned above, use accessories should not contain metallic components in its assembly, the use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided.

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

RF Exposure Statement

For body worn operation, this device has been tested and meets the IC RF exposure guidelines when used with an accessory designated for this product or when used with an accessory that contains no metal and that positions the handset a minimum of 0mm from the body. Noncompliance with the above restrictions may result in violation of RF exposure guidelines.

IC WARNING

This device contains licence-exempt transmitter(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

This Class B digital apparatus complies with Canadian ICES-003.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>