FITOP A60-E27 WiFi Smart Light Bulb User Manual

User Manual
Smart Bulb

A60-E27 WiFi Smart Light Bulb

https://a.smart321.com/fitopsmartbulb
(Scan QR code to download our Fitop APP)

Set up your smart bulb

1. Download Fitop APP
   Get Fitop APP from APP Store or Google Play, or by scanning the QR code below.

2. Login APP
   Register a Fitop APP account and login APP.

3. Add smart bulb
   Please turn on WiFi and Bluetooth on your phone or tablet.
   For a better experience, please turn on location permissions.
   Before adding the bulb, make sure your router’s network is 2.4Ghz or 2.4Ghz and 5Ghz coexisting.

https://a.smart321.com/fitopsmartbulb

Power on bulb ( 1s ) -> Turn off ( 1s ) -> on ( 1s ) -> off ( 1s ) -> on. The smart bulb will blink or breathe. If not, try again.
Tap the “ ” or ” Add Device ” button on the app. Bluetooth will discover the smart bulbs around. Add the bulb.
You can also add smart bulbs manually by following the instructions on the app.

FAQ

If you have any questions, you can contact us through the Fitop App.

Q1: How to investigate problems if can not connect the smart bulb?
A Piease check if the bulb s powered on properly.
B.Check if the phone is connected to WIFI and if your bulb s connected to the same WIFI as your phone.
C.Ensure the WIFI can access to interet, The only bands that support WIFI are 2.4Ghz or 2.4Ghz and 5Ghz coexistence.
D.Checkif the bulb i rapidly lashing(on 0.5 and off 0.55) before you add bulb.
E.Make sure the WIFi password enter in App is correct when adding device.
F.Please do not use bulb outside WIFi range and metal  container where can block WIF signals.
Q2: How to reset the bulb?
A. lf the bulb doesn’t have installed. Tum on ( 1s }–> off (25 )>on (15 )=-> off (25 )-—> on ( Wit for 55 ). And then the bulb willrapidly flash ( 2 times per second ).
B .If the bulb has been instaled. Clck “->Device Management->Remove Device” n the page *Hom the bulb will flash after 5 seconds.
Q3: How do I connect multiple bulbs on one switch?
A. APP can discover multple bulbs, but only one bulb can be connected at a ime, requiring multple dlicks to connect.
B.The bulb wil bink for 3-5 minutes, the successful pairing bulb willstop blinking and connect.

How to connect smart bulb to Amazon Alexa

1. Please tap Me ->Third-Parly Voice Services ->Alexa ~>Sign In With Amazon of Fitop AP to connect smart bulb to Alexa,
2. If you don’t know the connection steps, you can leam the detailed instruction on page of the “Me ->Third-Party Voice Services ->Alexa ->View more ways to link”.
3. Tapthe”Link with Account Password “
4. There are detailed connection course
   

How to connect smart bulb to Google Assistant

1. Please tap Me ->Third-Party Voice Servioes > Googlo Assistant ->Link with Google Assistantof Fitop APP o connectsmart bub o Google Assistant
2. If you dorit know the connection steps, you can leam e detaed instruction on page of the “Me >Trird-Parly Voics Servicss ->Google Assitant >View more ways to link.
3. Tap the “Link with Account Password”
4. There are detailed connection course

Warning

1. The bulb s limited to indoor use only, do not use in humid and high temperature environment.
2. D0 not touch the product when it s working due to the potential high temperature.
3. D0 ot use the product i the confined space of metal materials. Otherwise it can not be connected.

Instructions

We provide a two-year warranty and lfetime technical support for a Fitop product.
Contact us: Fitop_service@163.com
More exciing in Fitop APP.
Discover more products in the Fitop APP. Scan QR Code to download our Fitop APP

https://a.smart321.com/fitopsmartbulb

Made in China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>