BEGA 45 486.4 P Pendant Luminaire For Indoor Use Instruction Manual

: June 1, 2024
: BEGA

Table of Contents

BEGA 45 486.4 P Pendant Luminaire For Indoor Use
Specifications
Product Usage Instructions
FAQ
Dimension
Instructions for use
Product Description
Installation
Maintenance
CONTACT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BEGA 45 486.4 P Pendant Luminaire For Indoor Use

BEGA-45-486-4-P-Pendant-Luminaire-For-Indoor-Use-
product

Specifications

Lamp Luminaire with screw base E 27
Lamp output max. 75 W
Light sources of energy efficiency class E
Luminaire efficiency: 88%

Product Usage Instructions

Safety

The installation and operation of this luminaire are subject to national safety regulations. Only a qualified electrician should carry out the installation and commissioning. The manufacturer does not accept liability for damage due to improper use or installation. Any modifications to the luminaire should be done by a responsible person considered as the manufacturer.

Installation

Suspend the luminaire from the ceiling hook.
Make earth connection and electrical connection to the terminals.
Insert the lamp into the lampholder.
Unscrew the sphere cover and lift it.
Place the sphere onto the sphere support and adjust it accordingly.
Screw the sphere cover back on.
Press the canopy against the ceiling. Adjust the clamping effect for different cable diameters using the knurled nut at the lower part of the canopy.

FAQ

Q : Where can I find detailed technical and lighting data for the lamps?
A: You can find detailed technical and lighting data for the lamps in the data sheets available on our website.
Q: What are the spare parts available for this product?
A: The spare parts available include LED lamp 2700 K, LED lamp 3000 K, Synthetic sphere, Lampholder, Cover cap, and Canopy. The part numbers for these spares are provided in the manual.

Dimension

BEGA-45 486.4- P-Pendant-Luminaire-For-Indoor-fig-1

Instructions for use

Application
Pendant luminaire · indoor luminaire for free-radiating and uniform light with white synthetic globe and with metal housing.

Lamp

Luminaire with screw base E 27
Lamp output max. 75 W
This product contains light sources of energy efficiency class E

Supplied lamp

BEGA LED lamp 13565
LED 12 W · 1400 lm · 2700 K
dimmable

Supplied lamp

BEGA LED lamp 13592
LED 12 W · 1520 lm · 3000 K
dimmable

Luminaire efficiency: 88%
Detailed technical and lighting data for the lamps can be found in the data sheets on our website.

Product Description

Luminaire housing and canopy made of metal, finish Brass
White synthetic sphere
Cable pendant · Sheath cable white 3 × 0,75@ with 1 steel wire
The overall length of the luminaire is approx. 2000 mm Connection Terminal 2.5
Earth conductor connection
Lampholder E 27
Safety class I
Impact strength IK10
Protection against mechanical
impacts < 20 joule
– Conformity mark
Weight: 1.5 kg

Safety
The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician. The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Installation

Suspend the luminaire from the ceiling hook. Make earth connection and electrical connection to the terminals. Insert lamp into lamp holder. Unscrew the sphere cover and lift it. Place the sphere onto the sphere support and adjust it accordingly. Screw the sphere cover onto the sphere. Press the canopy against the ceiling. The clamping effect for different cable diameters can be adjusted by the knurled nut at the lower part of the canopy.

shortening of flex suspension

The flex suspension can only be shortened at the canopy end. Remove terminals from the cable. Loosen the fixing screw at the hanger, pull out the steel wire and loosen the screws from the cable collar. Shorten the cable to the desired length and strip end approx. 10 cm. Please consider these when cutting the cable to the required length. Place the cable back into the cable collar and tighten both screws. Make sure that approx. 5 mm of the cable coating protrudes out off the collar. Lead the steel wire through the little hole in the hanger and lead it back through the fixing terminal. Pull the steel wire tight and fix it with the screw. Connect wires to the terminals and make sure to connect the steel wire to the earth terminal.

Maintenance

Relamping · Maintenance
Disconnect the electrical installation. To clean the luminaire and to change the lamp unscrew the sphere cover and lift it. Take off the sphere. Clean sphere and luminaire. Use only solvent-free cleansers. Change the lamp.

Spares